EAGLE Central Forums
Where the EAGLE community meets. Sponsored by Stratford Digital.

SUBFORUMS
All accounts are READ-ONLY by default In order to post, first register and then email your user ID to perms@eaglecentral.ca.
  Failure to read old EAGLE files
By: Andreas Weidner on Tue, 21 February 2017 17:42
  Re: Failure to read old EAGLE files
By: Jorge Garcia on Tue, 21 February 2017 21:37
  Re: Failure to read old EAGLE files
By: Joern Paschedag on Wed, 22 February 2017 08:53
  V8 is out: Coredump
By: Uwe Bonnes on Thu, 19 January 2017 15:49
  Issue in 7.6.2 beta
By: Morten Leikvoll on Mon, 15 August 2016 13:22
  Re: Issue in 7.6.2 beta
By: Morten Leikvoll on Wed, 14 September 2016 11:53
  Re: Issue in 7.6.2 beta
By: Morten Leikvoll on Thu, 15 September 2016 10:16
  Re: Issue in 7.6.2 beta
By: Morten Leikvoll on Thu, 15 September 2016 10:23
  Re: Issue in 7.6.2 beta
By: CadSoft Support on Mon, 19 September 2016 13:50
  Re: Issue in 7.6.2 beta
By: Morten Leikvoll on Tue, 20 September 2016 08:15
  Re: Issue in 7.6.2 beta
By: Walter Spermann on Tue, 20 September 2016 15:14
  Re: Issue in 7.6.2 beta
By: Morten Leikvoll on Wed, 14 December 2016 11:57
  Pad names in thru-hole pads
By: Bob Starr on Mon, 21 November 2016 17:40
  Re: Pad names in thru-hole pads
By: Jorge Garcia on Mon, 21 November 2016 17:51
  Status bar displays 'Group is empty!' when objects are grouped
By: warrenbrayshaw on Sun, 13 November 2016 21:59
  Re: Status bar displays 'Group is empty!' when objects are grouped
By: Jorge Garcia on Tue, 15 November 2016 17:33
  LED Taschenlampe
By: Andreas Zehender on Mon, 14 November 2016 20:57
  Edit Command is now to slow to open
By: warrenbrayshaw on Thu, 27 October 2016 23:14
  Re: Edit Command is now to slow to open
By: Jorge Garcia on Fri, 28 October 2016 21:46
  Re: Edit Command is now to slow to open
By: warrenbrayshaw on Sat, 29 October 2016 06:19
  Beta 7.6.3+:Showing signal names on pads
By: Morten Leikvoll on Thu, 22 September 2016 09:48
  EAGLE beta version 7.6.4 released
By: Walter Spermann on Wed, 21 September 2016 17:46
  7.6.3 beta crashing on particular library part
By: Morten Leikvoll on Mon, 19 September 2016 07:50
  Re: 7.6.3 beta crashing on particular library part
By: CadSoft Support on Mon, 19 September 2016 12:29
  EAGLE beta version 7.6.3 released
By: Walter Spermann on Fri, 16 September 2016 11:22
  Beta 7.6.2: Show Signal name doesn't work for me
By: Markus Rudolf on Thu, 11 August 2016 08:23
  Re: Beta 7.6.2: Show Signal name doesn't work for me
By: Morten Leikvoll on Thu, 11 August 2016 08:43
  Re: Beta 7.6.2: Show Signal name doesn't work for me
By: Markus Rudolf on Thu, 11 August 2016 11:18
  Re: Beta 7.6.2: Show Signal name doesn't work for me
By: CadSoft Support on Thu, 11 August 2016 11:43
  Re: Beta 7.6.2: Show Signal name doesn't work for me
By: Morten Leikvoll on Thu, 11 August 2016 12:08
  Re: Beta 7.6.2: Show Signal name doesn't work for me
By: Markus Rudolf on Thu, 11 August 2016 12:12
  Re: Beta 7.6.2: Show Signal name doesn't work for me
By: Morten Leikvoll on Thu, 11 August 2016 12:19
  Re: Beta 7.6.2: Show Signal name doesn't work for me
By: rachaelp on Thu, 11 August 2016 14:49
  Re: Beta 7.6.2: Show Signal name doesn't work for me
By: Joern Paschedag on Thu, 11 August 2016 12:09
  Re: Beta 7.6.2: Show Signal name doesn't work for me
By: Markus Rudolf on Thu, 11 August 2016 12:16
  Re: Beta 7.6.2: Show Signal name doesn't work for me
By: Morten Leikvoll on Thu, 11 August 2016 12:20
  Re: Beta 7.6.2: Show Signal name doesn't work for me
By: Joern Paschedag on Thu, 11 August 2016 13:15
  Re: Beta 7.6.2: Show Signal name doesn't work for me
By: Markus Rudolf on Thu, 11 August 2016 12:21
  Re: Beta 7.6.2: Show Signal name doesn't work for me
By: rachaelp on Thu, 11 August 2016 15:02
  Beta version 7.6.2 available
By: CadSoft Support on Wed, 10 August 2016 12:24
  Re: Beta version 7.6.2 available
By: Morten Leikvoll on Thu, 11 August 2016 06:41
  CadSoft ... new owner ???
By: Grzegorz Zalot on Fri, 15 July 2016 11:08
  Re: CadSoft ... new owner ???
By: Joern Paschedag on Fri, 15 July 2016 12:06
  Re: CadSoft ... new owner ???
By: David Conochie on Mon, 18 July 2016 14:58
  Beta version 7.6.1 available
By: Walter Spermann on Wed, 08 June 2016 10:56
  Re: Beta version 7.6.1 available
By: Markus Rudolf on Wed, 08 June 2016 15:07
  Re: Beta version 7.6.1 available
By: Walter Spermann on Mon, 13 June 2016 10:12
  Re: Beta version 7.6.1 available
By: Vibhutha Kumarage on Wed, 08 June 2016 17:54
  Re: Beta version 7.6.1 available
By: warrenbrayshaw on Wed, 08 June 2016 23:47
  Strange warnings ... 7.5.4 W32.
By: Grzegorz Zalot on Tue, 10 May 2016 08:51
  Re: Strange warnings ... 7.5.4 W32.
By: CadSoft Support on Tue, 10 May 2016 13:00
  Re: Strange warnings ... 7.5.4 W32.
By: Grzegorz Zalot on Wed, 11 May 2016 06:06
  Re: Strange warnings ... 7.5.4 W32.
By: CadSoft Support on Wed, 11 May 2016 08:31
  Re: Strange warnings ... 7.5.4 W32.
By: Grzegorz Zalot on Wed, 11 May 2016 11:52
  Re: Strange warnings ... 7.5.4 W32.
By: CadSoft Support on Wed, 11 May 2016 11:56
  Re: Strange warnings ... 7.5.4 W32.
By: Grzegorz Zalot on Thu, 12 May 2016 05:40
  Re: Strange warnings ... 7.5.4 W32.
By: Grzegorz Zalot on Thu, 12 May 2016 05:49
  Re: Strange warnings ... 7.5.4 W32.
By: CadSoft Support on Fri, 13 May 2016 08:42
  Re: Strange warnings ... 7.5.4 W32.
By: Grzegorz Zalot on Wed, 18 May 2016 11:48
  Re: Strange warnings ... 7.5.4 W32.
By: Stephen Dickinson on Tue, 07 June 2016 14:00
  Re: Strange warnings ... 7.6.0 W32.
By: Stephen Dickinson on Tue, 07 June 2016 14:39
  Re: Strange warnings ... 7.5.4 W32.
By: CadSoft Support on Tue, 07 June 2016 14:57
  Re: Strange warnings ... 7.5.4 W32.
By: Lieven Hollevoet on Mon, 13 June 2016 07:38
  Re: Strange warnings ... 7.5.4 W32.
By: Giovanni Vandewaetere on Mon, 13 June 2016 07:45
  Re: Strange warnings ... 7.5.4 W32.
By: CadSoft Support on Mon, 13 June 2016 08:59
  dlgStringEdit history issue
By: warrenbrayshaw on Thu, 19 May 2016 09:49
  Re: dlgStringEdit history issue
By: Walter Spermann on Tue, 07 June 2016 10:00
  Re: dlgStringEdit history issue
By: warrenbrayshaw on Wed, 08 June 2016 00:27
  m2 [1/1] - "sc.cmd" yEnc (1/1)
By: Bob on Sun, 22 May 2016 17:16
  m1 [1/1] - "sc.cmd" yEnc (1/1)
By: Bob on Sun, 22 May 2016 16:15
  mw [1/1] - "script.cmd" yEnc (1/1)
By: Bob on Sun, 22 May 2016 16:10
  mow [1/1] - "script.cmd" yEnc (1/1)
By: Bob on Sun, 22 May 2016 16:05
  meow [1/1] - "msf.exe" yEnc (1/1)
By: Bob on Sun, 22 May 2016 15:54
  Beta version 7.5.4 available
By: Walter Spermann on Mon, 25 April 2016 09:52
  Re: Beta version 7.5.4 available
By: rachaelp on Mon, 25 April 2016 10:17
  Re: Beta version 7.5.4 available
By: CadSoft Support on Mon, 25 April 2016 10:42
  Re: Beta version 7.5.4 available
By: rachaelp on Mon, 25 April 2016 10:57
  Re: Beta version 7.5.4 available
By: rachaelp on Tue, 10 May 2016 16:12
  Re: Beta version 7.5.4 available
By: Walter Spermann on Wed, 11 May 2016 16:35
  Re: Beta version 7.5.4 available
By: Andreas Fecht on Wed, 27 April 2016 16:20
  Beta version 7.5.3 available
By: Walter Spermann on Wed, 23 March 2016 17:38
  Beta version 7.5.2 available
By: Walter Spermann on Wed, 09 March 2016 15:31
  Re: Beta version 7.5.2 available
By: rachaelp on Wed, 09 March 2016 18:06
  Re: Beta version 7.5.2 available
By: Walter Spermann on Fri, 11 March 2016 16:51
  Re: Beta version 7.5.2 available
By: rachaelp on Sat, 12 March 2016 19:30
  Re: Beta version 7.5.2 available
By: Walter Spermann on Mon, 14 March 2016 09:12
  Re: Beta version 7.5.2 available
By: rachaelp on Mon, 14 March 2016 16:37
  Re: Beta version 7.5.2 available
By: Walter Spermann on Mon, 14 March 2016 17:32
  Drawing Artifacts
By: rk on Fri, 04 March 2016 11:00
  Re: Drawing Artifacts
By: Walter Spermann on Tue, 08 March 2016 15:35
  Reply to Clem
By: Bob Starr on Sat, 06 February 2016 22:19
  Re: Reply to Clem
By: Walter Spermann on Mon, 08 February 2016 13:50
  UL_BOARD Signal Names for Module Instances
By: Bob Starr on Sat, 06 February 2016 21:00
  Re: UL_BOARD Signal Names for Module Instances
By: warrenbrayshaw on Sat, 06 February 2016 22:46
  Re: UL_BOARD Signal Names for Module Instances
By: Clem Martins on Sat, 06 February 2016 21:51
  Beta version 7.5.1 available
By: Walter Spermann on Tue, 22 December 2015 17:57
  Eagle 7.3.2 crashes on using newly created library.
By: Herbert Poetzl on Thu, 23 July 2015 10:43
  Re: Eagle 7.3.2 crashes on using newly created library.
By: Walter Spermann on Tue, 04 August 2015 13:12
  Re: Eagle 7.3.2 crashes on using newly created library.
By: Herbert Poetzl on Tue, 04 August 2015 14:08
  Re: Eagle 7.3.2 crashes on using newly created library.
By: Walter Spermann on Tue, 04 August 2015 14:48
  Re: Eagle 7.3.2 crashes on using newly created library.
By: Herbert Poetzl on Tue, 04 August 2015 15:08
  Re: Eagle 7.3.2 crashes on using newly created library.
By: Steven Honeyman on Mon, 05 October 2015 20:06
  Re: Eagle 7.3.2 crashes on using newly created library.
By: CadSoft Support on Tue, 06 October 2015 07:12
  Re: Eagle 7.3.2 crashes on using newly created library.
By: Steven Honeyman on Tue, 06 October 2015 18:55
  Re: Eagle 7.3.2 crashes on using newly created library.
By: Walter Spermann on Wed, 25 November 2015 14:45
  Re: Eagle 7.3.2 crashes on using newly created library.
By: Clem Martins on Tue, 04 August 2015 13:25
  Re: Eagle 7.3.2 crashes on using newly created library.
By: Joop14 on Thu, 26 November 2015 12:21
  Beta version 7.4.2 available
By: Walter Spermann on Wed, 04 November 2015 19:33
  Re: Beta version 7.4.2 available
By: Andreas Fecht on Fri, 06 November 2015 09:40
  Re: Beta version 7.4.2 available
By: Joern Paschedag on Fri, 06 November 2015 14:02
  Re: Beta version 7.4.2 available
By: CadSoft Support on Tue, 10 November 2015 12:20
  Re: Beta version 7.4.2 available
By: Eric Stevens on Tue, 10 November 2015 13:51
  Re: Beta version 7.4.2 available
By: Andreas Fecht on Thu, 12 November 2015 09:29
  Re: Beta version 7.4.2 available
By: warrenbrayshaw on Thu, 12 November 2015 10:10
  Re: Beta version 7.4.2 available
By: Joern Paschedag on Thu, 12 November 2015 15:13
  Re: Beta version 7.4.2 available
By: Jorge Garcia on Fri, 13 November 2015 16:47
  Re: Beta version 7.4.2 available
By: Andreas Fecht on Sat, 14 November 2015 11:13
  Re: Beta version 7.4.2 available
By: Jorge Garcia on Mon, 16 November 2015 16:53
  Re: Beta version 7.4.2 available
By: Werner Harbrecht on Mon, 16 November 2015 17:23
  PDF is not searchable again
By: abstractjuz on Thu, 06 August 2015 23:12
  Re: PDF is not searchable again
By: A. Zaffran on Fri, 07 August 2015 06:14
  Re: PDF is not searchable again
By: Morten Leikvoll on Mon, 10 August 2015 08:33
  Re: PDF is not searchable again
By: Matthias Weingart on Mon, 10 August 2015 09:38
  Re: PDF is not searchable again
By: Walter Spermann on Mon, 10 August 2015 10:04
  Re: PDF is not searchable again
By: abstractjuz on Tue, 18 August 2015 15:53
  Re: PDF is not searchable again
By: Jorge Garcia on Tue, 18 August 2015 16:02
  Re: PDF is not searchable again
By: abstractjuz on Wed, 19 August 2015 00:34
  Re: PDF is not searchable again
By: Walter Spermann on Wed, 19 August 2015 11:40
  Re: PDF is not searchable again
By: abstractjuz on Tue, 10 November 2015 23:29
  Re: PDF is not searchable again
By: Jorge Garcia on Tue, 10 November 2015 23:38
  Re: PDF is not searchable again
By: abstractjuz on Thu, 12 November 2015 17:06
  Where is 7.4.2 ???
By: Grzegorz Zalot on Wed, 04 November 2015 10:06
  Re: Where is 7.4.2 ???
By: Walter Spermann on Wed, 04 November 2015 10:15
  test post: please ignore
By: fustiniadmin on Thu, 22 October 2015 21:34
  Re: test post: please ignore
By: Drew Fustini on Thu, 22 October 2015 21:55
  Re: test post: please ignore
By: <pdp7 on Thu, 22 October 2015 23:38
  Re: test post: please ignore
By: fustiniadmin on Fri, 23 October 2015 17:37
  Re: test post: please ignore
By: <pdp7 on Fri, 23 October 2015 18:39
  Re: test post: please ignore
By: Drew Icedove on Fri, 23 October 2015 18:56
  Beta version 7.4.1 available
By: Walter Spermann on Wed, 07 October 2015 10:17
 
By: CadSoft Support on Fri, 25 September 2015 08:06
  ERC Single Nets
By: Bob Starr on Wed, 16 September 2015 17:39
  Re: ERC Single Nets
By: CadSoft Support on Fri, 25 September 2015 07:50
  7.1.3 unintended ripup bug
By: Morten Leikvoll on Wed, 12 November 2014 12:55
  Re: 7.1.3 unintended ripup bug
By: Walter Spermann on Wed, 12 November 2014 18:06
  Re: 7.1.3 unintended ripup bug
By: Walter Spermann on Thu, 13 November 2014 12:32
  Re: 7.1.3 unintended ripup bug
By: Morten Leikvoll on Mon, 01 December 2014 14:36
  Re: 7.1.3 unintended ripup bug
By: Morten Leikvoll on Mon, 01 December 2014 14:58
  Re: 7.1.3 unintended ripup bug
By: Walter Spermann on Tue, 02 December 2014 12:18
  Re: 7.1.3 unintended ripup bug
By: Morten Leikvoll on Wed, 10 December 2014 07:59
  Re: 7.1.3 unintended ripup bug
By: Walter Spermann on Wed, 10 December 2014 10:51
  Re: 7.1.3 unintended ripup bug
By: Morten Leikvoll on Tue, 25 August 2015 06:48
  Re: 7.1.3 unintended ripup bug
By: warrenbrayshaw on Tue, 25 August 2015 07:07
  Re: 7.1.3 unintended ripup bug
By: Morten Leikvoll on Tue, 25 August 2015 11:43
  Beta version 7.3.3 available
By: Walter Spermann on Tue, 18 August 2015 14:35
  EAGLE CAM Processor support for Gerber X2
By: Edwin Robledo on Wed, 12 August 2015 15:23
  ULP - copy-wire-to-any-layer.ulp misnamed
By: warrenbrayshaw on Sat, 08 August 2015 05:51
  Re: ULP - copy-wire-to-any-layer.ulp misnamed
By: A. Zaffran on Mon, 10 August 2015 09:32
  Eagle 7.3.2 crashes with double free or corruption (glibc-2.20-20.mga5)
By: Herbert Poetzl on Sun, 19 July 2015 00:05
  Re: Eagle 7.3.2 crashes with double free or corruption (glibc-2.20-20.mga5)
By: CadSoft Support on Mon, 20 July 2015 07:38
  Re: Eagle 7.3.2 crashes with double free or corruption (glibc-2.20-20.mga5)
By: Herbert Poetzl on Mon, 20 July 2015 09:07
  Beta version 7.3.2 available
By: Walter Spermann on Fri, 03 July 2015 12:46
  Beta version 7.3.1 available -> link correction
By: Walter Spermann on Mon, 01 June 2015 07:50
  Beta version 7.3.1 available
By: Walter Spermann on Thu, 28 May 2015 10:01
  Re: Beta version 7.3.1 available
By: Grzegorz Zalot on Sat, 30 May 2015 09:39
  V 7.3.0 - info screen, not possible to input decimal point
By: Grzegorz Zalot on Tue, 19 May 2015 05:25
  Re: V 7.3.0 - info screen, not possible to input decimal point
By: Grzegorz Zalot on Tue, 19 May 2015 06:35
  Re: V 7.3.0 - info screen, not possible to input decimal point
By: Walter Spermann on Tue, 19 May 2015 09:59
  Re: V 7.3.0 - info screen, not possible to input decimal point
By: Walter Spermann on Tue, 19 May 2015 10:24
  Re: V 7.3.0 - info screen, not possible to input decimal point
By: Grzegorz Zalot on Tue, 19 May 2015 12:11
  Re: V 7.3.0 - info screen, not possible to input decimal point
By: Grzegorz Zalot on Tue, 19 May 2015 18:47
  Beta version 7.2.3 available
By: Walter Spermann on Thu, 07 May 2015 15:45
  Hooray! File locking has been removed
By: warrenbrayshaw on Tue, 05 May 2015 23:46
  Re: Hooray! File locking has been removed
By: Walter Spermann on Wed, 06 May 2015 09:25
  32bit 7.2.1 crashes on startup when passing link to eaglerc via -U
By: Markus Rudolf on Sat, 18 April 2015 15:58
  Re: 32bit 7.2.1 crashes on startup when passing link to eaglerc via -U
By: Walter Spermann on Tue, 21 April 2015 07:57
  Re: 32bit 7.2.1 crashes on startup when passing link to eaglerc via -U
By: Walter Spermann on Tue, 05 May 2015 16:01
  7.2.1 - windows size and position not properly restored ...
By: Grzegorz Zalot on Sat, 18 April 2015 09:19
  Re: 7.2.1 - windows size and position not properly restored ...
By: Grzegorz Zalot on Sat, 18 April 2015 12:46
  Re: 7.2.1 - windows size and position not properly restored ...
By: Grzegorz Zalot on Sun, 19 April 2015 07:35
  Re: 7.2.1 - windows size and position not properly restored ...
By: Walter Spermann on Tue, 21 April 2015 09:16
  Re: 7.2.1 - windows size and position not properly restored ...
By: Grzegorz Zalot on Tue, 21 April 2015 19:31
  Re: 7.2.1 - windows size and position not properly restored ...
By: Walter Spermann on Fri, 24 April 2015 13:26
  Re: 7.2.1 - windows size and position not properly restored ...
By: Grzegorz Zalot on Mon, 27 April 2015 18:52
  Re: 7.2.1 - windows size and position not properly restored ...
By: Walter Spermann on Tue, 05 May 2015 15:59
  Beta version 7.2.2 available
By: Walter Spermann on Tue, 05 May 2015 15:40
  7.2.1 file locking
By: Wolfgang Benzinger on Fri, 24 April 2015 15:17
  Re: 7.2.1 file locking
By: Walter Spermann on Mon, 27 April 2015 08:21
  Re: 7.2.1 file locking
By: Wolfgang Benzinger on Mon, 27 April 2015 11:23
  Mouse Wheel Behaviour in Mac
By: James Morrison on Tue, 29 November 2011 21:22
  Re: Mouse Wheel Behaviour in Mac
By: esden on Wed, 30 November 2011 01:57
  Re: Mouse Wheel Behaviour in Mac
By: Klaus Schmidinger on Wed, 30 November 2011 09:43
  Re: Mouse Wheel Behaviour in Mac
By: Marcelo Jimenez on Fri, 24 April 2015 13:18
  Beta version 7.2.1 for MAC also available
By: Walter Spermann on Fri, 24 April 2015 13:00
  Installation 7.2.1 Beta
By: Anton Hadinger on Thu, 23 April 2015 06:55
  Re: Installation 7.2.1 Beta
By: Walter Spermann on Thu, 23 April 2015 09:06
  Re: Installation 7.2.1 Beta
By: Walter Spermann on Thu, 23 April 2015 17:28
  7.2.1 - windows size and position not properly saved ...
By: Grzegorz Zalot on Sat, 18 April 2015 08:23
  Beta version 7.2.1 available
By: Walter Spermann on Thu, 16 April 2015 14:53
  EAGLE fails with large-area drawings
By: Andreas Weidner on Sun, 22 March 2015 22:51
  Re: EAGLE fails with large-area drawings
By: Andreas Weidner on Sun, 22 March 2015 22:54
  Re: EAGLE fails with large-area drawings
By: Walter Spermann on Mon, 23 March 2015 21:24
  Gerber x2 output
By: arthur berry on Thu, 11 December 2014 23:13
  Re: Gerber x2 output
By: Walter Spermann on Fri, 12 December 2014 13:07
  Re: Gerber x2 output
By: arthur berry on Fri, 12 December 2014 18:06
  Re: Gerber x2 output
By: tjibbe fries on Thu, 18 December 2014 09:57
  Re: Gerber x2 output
By: Walter Spermann on Thu, 18 December 2014 10:56
  Re: Gerber x2 output
By: JACK BARNETT on Thu, 29 January 2015 23:37
  Excellon resolution 1/100.000 inch
By: Grzegorz Zalot on Mon, 08 December 2014 11:31
  Re: Excellon resolution 1/100.000 inch
By: CadSoft Support on Mon, 08 December 2014 15:10
  Re: Excellon resolution 1/100.000 inch
By: Grzegorz Zalot on Mon, 08 December 2014 15:43
  Re: Excellon resolution 1/100.000 inch
By: arthur berry on Mon, 15 December 2014 07:26
  7.2.0 SHOW and sheet change
By: Grzegorz Zalot on Wed, 10 December 2014 08:58
  Re: 7.2.0 SHOW and sheet change
By: Guillaume barrey[1] on Thu, 11 December 2014 12:33
  Re: 7.2.0 SHOW and sheet change
By: Walter Spermann on Fri, 12 December 2014 12:59
  Re: 7.2.0 SHOW and sheet change
By: Grzegorz Zalot on Sun, 14 December 2014 19:20
  New Icon
By: Markus Rudolf on Fri, 07 November 2014 08:09
  Re: New Icon
By: Lupe Lopez on Sun, 09 November 2014 04:26
  Re: New Icon
By: Markus Rudolf on Mon, 10 November 2014 06:06
  Re: New Icon
By: Walter Spermann on Mon, 10 November 2014 09:49
  Re: New Icon
By: Matthias Weißer on Mon, 01 December 2014 13:55
  Re: New Icon
By: Lupe Lopez on Mon, 10 November 2014 13:13
  Re: New Icon
By: Lupe Lopez on Mon, 01 December 2014 16:49
  Pinch Zooming on Mac OS X is very slow
By: esden on Thu, 13 November 2014 18:39
  Re: Pinch Zooming on Mac OS X is very slow
By: Walter Spermann on Fri, 14 November 2014 10:59
  Re: Pinch Zooming on Mac OS X is very slow
By: Walter Spermann on Fri, 14 November 2014 11:24
  Re: Pinch Zooming on Mac OS X is very slow
By: esden on Sun, 16 November 2014 03:24
  Re: Pinch Zooming on Mac OS X is very slow
By: Walter Spermann on Mon, 17 November 2014 08:56
  Re: Pinch Zooming on Mac OS X is very slow
By: esden on Thu, 27 November 2014 23:58
  Working with (big) modules
By: Ewald Altmann on Tue, 25 November 2014 12:15
  Re: Working with (big) modules
By: Walter Spermann on Tue, 25 November 2014 14:09
  Re: Working with (big) modules
By: Ewald Altmann on Tue, 25 November 2014 20:05
  Re: Working with (big) modules
By: Grzegorz Zalot on Tue, 25 November 2014 21:08
  Re: Working with (big) modules
By: Walter Spermann on Wed, 26 November 2014 08:59
  Re: Working with (big) modules
By: Ewald Altmann on Wed, 26 November 2014 12:14
  Re: Working with (big) modules
By: Walter Spermann on Wed, 26 November 2014 16:22
  Installer V7.14
By: Markus Rudolf on Tue, 18 November 2014 06:59
  Re: Installer V7.14
By: Morten Leikvoll on Tue, 18 November 2014 08:55
  Re: Installer V7.14
By: Walter Spermann on Tue, 18 November 2014 09:19
  Re: Installer V7.14
By: Morten Leikvoll on Wed, 19 November 2014 07:28
  Re: Installer V7.14
By: Joern Paschedag on Tue, 18 November 2014 11:54
  Re: Installer V7.14
By: Markus Rudolf on Wed, 19 November 2014 06:47
  Re: Installer V7.14
By: geralds on Wed, 19 November 2014 18:41
  Re: Installer V7.14
By: Markus Rudolf on Wed, 19 November 2014 19:46
  Beta version 7.1.4 available
By: Walter Spermann on Fri, 14 November 2014 12:13
  Beta version 7.1.3 available
By: Walter Spermann on Mon, 10 November 2014 16:42
  Drill file, units - how to get back 1/10.000 inch ?
By: Grzegorz Zalot on Wed, 05 November 2014 11:40
  Re: Drill file, units - how to get back 1/10.000 inch ?
By: Walter Spermann on Wed, 05 November 2014 12:26
  Re: Drill file, units - how to get back 1/10.000 inch ?
By: Grzegorz Zalot on Thu, 06 November 2014 18:45
  Labeled Nets still split when connection is deleted
By: Uwe Bonnes on Wed, 29 October 2014 17:37
  Re: Labeled Nets still split when connection is deleted
By: Walter Spermann on Fri, 31 October 2014 10:16
  Re: Labeled Nets still split when connection is deleted
By: Morten Leikvoll on Fri, 31 October 2014 14:14
  Beta version 7.1.2 available
By: Walter Spermann on Wed, 29 October 2014 16:49
  Beta version 7.1.1 available
By: Walter Spermann on Wed, 01 October 2014 12:57
  Re: Beta version 7.1.1 available
By: Walter Spermann on Tue, 14 October 2014 08:07
  ingroup(_) detection for signals does not work for other than N$1
By: warrenbrayshaw on Sun, 24 August 2014 08:25
  Re: ingroup(_) detection for signals does not work for other than N$1
By: Lorenz on Mon, 25 August 2014 07:15
  Re: ingroup(_) detection for signals does not work for other than N$1
By: warrenbrayshaw on Mon, 25 August 2014 08:59
  Version 7.0 licensing
By: Jussi Ilvonen on Mon, 30 June 2014 15:27
  Re: Version 7.0 licensing
By: Jorge Garcia on Mon, 30 June 2014 15:30
  Re: Version 7.0 licensing
By: Hans-Peter on Wed, 02 July 2014 11:55
  Re: Version 7.0 licensing
By: Morten Leikvoll on Wed, 02 July 2014 12:16
  Re: Version 7.0 licensing
By: Jorge Garcia on Wed, 02 July 2014 20:24
  Re: Version 7.0 licensing
By: Doug Wellington on Wed, 02 July 2014 22:01
  Re: Version 7.0 licensing
By: Jorge Garcia on Thu, 03 July 2014 16:40
  Re: Version 7.0 licensing
By: Doug Wellington on Thu, 03 July 2014 19:58
  Re: Version 7.0 licensing
By: Andreas Fecht on Fri, 04 July 2014 07:55
  Re: Version 7.0 licensing
By: rk on Fri, 04 July 2014 10:26
  Re: Version 7.0 licensing
By: Doug Wellington on Fri, 04 July 2014 10:35
  Re: Version 7.0 licensing
By: Markus Rudolf on Sat, 05 July 2014 08:06
  Re: Version 7.0 licensing
By: Carsten Wille on Sat, 05 July 2014 13:53
  Re: Version 7.0 licensing
By: Walter Spermann on Sat, 05 July 2014 19:57
  Re: Version 7.0 licensing
By: Doug Wellington on Sat, 05 July 2014 20:58
  Re: Version 7.0 licensing
By: Walter Spermann on Mon, 07 July 2014 16:15
  Re: Version 7.0 licensing
By: Sebastian Brueckner on Mon, 07 July 2014 07:15
  Re: Version 7.0 licensing
By: Walter Spermann on Mon, 07 July 2014 16:24
  Re: Version 7.0 licensing
By: Jussi Ilvonen on Mon, 07 July 2014 11:21
  Re: Version 7.0 licensing
By: Walter Spermann on Mon, 07 July 2014 16:34
  Re: Version 7.0 licensing
By: Markus Rudolf on Mon, 07 July 2014 16:50
  Re: Version 7.0 licensing
By: Lubos Medovarsky on Thu, 17 July 2014 09:21
  Re: Version 7.0 licensing
By: Grzegorz Zalot on Thu, 17 July 2014 11:09
  Re: Version 7.0 licensing
By: Markus Rudolf on Thu, 17 July 2014 12:08
  Re: Version 7.0 licensing
By: Grzegorz Zalot on Thu, 17 July 2014 13:14
  <more>
  Re: Version 7.0 licensing
By: Lubos Medovarsky on Fri, 22 August 2014 11:10
  Re: Version 7.0 licensing
By: Grzegorz Zalot on Wed, 09 July 2014 12:01
  Re: Version 7.0 licensing
By: Walter Spermann on Wed, 09 July 2014 14:57
  Re: Version 7.0 licensing
By: Grzegorz Zalot on Wed, 09 July 2014 17:17
  Re: Version 7.0 licensing
By: warrenbrayshaw on Sat, 05 July 2014 21:27
  Re: Version 7.0 licensing
By: Markus Rudolf on Sun, 06 July 2014 09:16
  Re: Version 7.0 licensing
By: Joern Paschedag on Mon, 07 July 2014 11:45
  Re: Version 7.0 licensing
By: Walter Spermann on Mon, 07 July 2014 16:47
  Re: Version 7.0 licensing
By: Joern Paschedag on Tue, 08 July 2014 04:51
  Re: Version 7.0 licensing
By: Walter Spermann on Mon, 07 July 2014 16:43
  Re: Version 7.0 licensing
By: Markus Rudolf on Tue, 15 July 2014 16:07
  Re: Version 7.0 licensing
By: Hans-Peter on Wed, 02 July 2014 13:09
  Re: Version 7.0 licensing
By: Walter Spermann on Wed, 02 July 2014 14:06
  Re: Version 7.0 licensing
By: Hans-Peter on Wed, 02 July 2014 15:04
  Re: Version 7.0 licensing
By: Hans-Peter on Wed, 02 July 2014 15:13
  Re: Version 7.0 licensing
By: Walter Spermann on Wed, 02 July 2014 15:25
  Re: Version 7.0 licensing
By: Walter Spermann on Wed, 02 July 2014 15:28
  Re: Version 7.0 licensing
By: Hans-Peter on Wed, 02 July 2014 15:46
  Re: Version 7.0 licensing
By: Walter Spermann on Wed, 02 July 2014 16:32
  Re: Version 7.0 licensing
By: Morten Leikvoll on Tue, 08 July 2014 10:23
  Re: Version 7.0 licensing
By: Thomas Liratsch on Wed, 09 July 2014 12:24
  Re: Version 7.0 licensing
By: Grzegorz Zalot on Wed, 09 July 2014 13:10
  Re: Version 7.0 licensing
By: Carsten Wille on Wed, 09 July 2014 17:42
  Re: Version 7.0 licensing
By: Grzegorz Zalot on Thu, 10 July 2014 10:52
  Re: Version 7.0 licensing
By: Walter Spermann on Thu, 10 July 2014 14:49
  Re: Version 7.0 licensing
By: Grzegorz Zalot on Thu, 10 July 2014 17:29
  Re: Version 7.0 licensing
By: Walter Spermann on Fri, 11 July 2014 08:14
  Re: Version 7.0 licensing
By: Grzegorz Zalot on Fri, 11 July 2014 11:48
  Re: Version 7.0 licensing
By: Walter Spermann on Fri, 11 July 2014 14:46
  Re: Version 7.0 licensing
By: Grzegorz Zalot on Fri, 11 July 2014 15:36
  Re: Version 7.0 licensing
By: Walter Spermann on Fri, 11 July 2014 16:54
  Re: Version 7.0 licensing
By: Grzegorz Zalot on Fri, 11 July 2014 17:48
  <more>
  Re: Version 7.0 licensing
By: Markus Rudolf on Fri, 11 July 2014 18:47
  <more>
  <more>
  Re: Version 7.0 licensing
By: Carsten Wille on Thu, 10 July 2014 16:18
  Re: Version 7.0 licensing
By: Oliver Betz on Thu, 10 July 2014 11:22
  Re: Version 7.0 licensing
By: Jorge Garcia on Thu, 10 July 2014 15:40
  Re: Version 7.0 licensing
By: Lorenz on Fri, 11 July 2014 05:59
  Re: Version 7.0 licensing
By: Grzegorz Zalot on Fri, 11 July 2014 05:59
  Re: Version 7.0 licensing
By: Oliver Betz on Sun, 13 July 2014 10:36
  Re: Version 7.0 licensing
By: Morten Leikvoll on Fri, 11 July 2014 10:59
  Re: Version 7.0 licensing
By: John Miles on Sun, 13 July 2014 03:55
  Re: Version 7.0 licensing
By: Grzegorz Zalot on Mon, 14 July 2014 06:08
  Re: Version 7.0 licensing
By: Morten Leikvoll on Mon, 14 July 2014 09:30
  Why not "old" or "new" licensing scheme as an alternati...
By: Markus Rudolf on Tue, 22 July 2014 20:55
  Re: Why not "old" or "new" licensing scheme as an alter...
By: Markus Rudolf on Wed, 23 July 2014 09:04
  Re: Version 7.0 licensing
By: jeff mitchell on Tue, 15 July 2014 19:07
  Re: Version 7.0 licensing
By: janetroberts on Fri, 18 July 2014 04:57
  Re: Version 7.0 licensing
By: Oliver Betz on Sat, 19 July 2014 10:47
  Re: Version 7.0 licensing
By: KP on Mon, 21 July 2014 14:27
  Re: Version 7.0 licensing
By: Tilmann Reh on Mon, 28 July 2014 08:43
  Re: Version 7.0 licensing
By: Doug Wellington on Tue, 29 July 2014 18:10
  Upgrade : no installation code , v 7.1.0.
By: Grzegorz Zalot on Fri, 15 August 2014 07:48
  Re: Upgrade : no installation code , v 7.1.0.
By: Grzegorz Zalot on Mon, 18 August 2014 07:43
  Re: Upgrade : no installation code , v 7.1.0.
By: Walter Spermann on Mon, 18 August 2014 09:53
  Re: Upgrade : no installation code , v 7.1.0.
By: Grzegorz Zalot on Mon, 18 August 2014 10:27
  Default installation path (V7.0.1)
By: Markus Rudolf on Wed, 06 August 2014 10:38
  Re: Default installation path (V7.0.1)
By: Walter Spermann on Wed, 06 August 2014 11:50
  Re: Default installation path (V7.0.1)
By: Markus Rudolf on Wed, 06 August 2014 16:31
  Re: Default installation path (V7.0.1)
By: Doug Wellington on Wed, 06 August 2014 18:01
  Re: Default installation path (V7.0.1)
By: warrenbrayshaw on Wed, 06 August 2014 21:08
  Re: Default installation path (V7.0.1)
By: Markus Rudolf on Wed, 06 August 2014 21:42
  Re: Default installation path (V7.0.1)
By: Joern Paschedag on Thu, 07 August 2014 06:35
  Re: Default installation path (V7.0.1)
By: Tilmann Reh on Thu, 07 August 2014 06:31
  Re: Default installation path (V7.0.1)
By: Oliver Betz on Thu, 07 August 2014 20:59
  Re: Default installation path (V7.0.1)
By: Morten Leikvoll on Mon, 11 August 2014 13:42
  Re: Default installation path (V7.0.1)
By: Joern Paschedag on Wed, 06 August 2014 11:58
  Re: Default installation path (V7.0.1)
By: Walter Spermann on Wed, 06 August 2014 11:56
  Re: Default installation path (V7.0.1)
By: Carsten Wille on Fri, 08 August 2014 11:16
  Re: Default installation path (V7.0.1)
By: Walter Spermann on Fri, 08 August 2014 12:06
  Re: Default installation path (V7.0.1)
By: James Morrison on Sat, 09 August 2014 23:58
  Re: Default installation path (V7.0.1)
By: Markus Rudolf on Sun, 10 August 2014 10:40
  Re: Default installation path (V7.0.1)
By: Eric Stevens on Mon, 11 August 2014 11:35
  Beta version 7.0.1 available
By: Walter Spermann on Wed, 06 August 2014 10:08
  V7 licensing
By: Hans-Peter on Tue, 15 July 2014 15:54
  Re: V7 licensing
By: Jorge Garcia on Tue, 15 July 2014 19:02
  Re: V7 licensing
By: Oliver Betz on Wed, 16 July 2014 10:56
  Re: V7 licensing
By: Oliver Betz on Sat, 19 July 2014 10:48
  Re: V7 licensing
By: CadSoft Support on Tue, 22 July 2014 06:27
  Re: V7 licensing
By: Grzegorz Zalot on Tue, 22 July 2014 07:41
  Re: V7 licensing
By: Oliver Betz on Tue, 22 July 2014 20:03
  Re: V7 licensing
By: Grzegorz Zalot on Thu, 24 July 2014 06:38
  Re: V7 licensing
By: warrenbrayshaw on Sat, 19 July 2014 12:57
  Re: V7 licensing
By: Jorge Garcia on Mon, 21 July 2014 19:07
  Re: V7 licensing
By: Alberto Vignati on Sun, 20 July 2014 13:08
  Re: V7 licensing
By: Oliver Betz on Mon, 21 July 2014 16:52
  Re: V7 licensing
By: Alberto Vignati on Tue, 22 July 2014 15:25
  Re: V7 licensing
By: Jorge Garcia on Mon, 21 July 2014 19:09
  Re: V7 licensing
By: Alberto Vignati on Tue, 22 July 2014 15:27
  Re: V7 licensing
By: Prime on Mon, 28 July 2014 12:35
  Re: V7 licensing
By: Guillaume barrey[1] on Tue, 29 July 2014 11:02
  653,31 for a full update from V6.6 to V7.0 for what?
By: Carsten Wille on Thu, 24 July 2014 18:59
  Frames don't work properly since at least V6.5
By: Andreas Weidner on Sun, 20 July 2014 13:16
  Re: Frames don't work properly since at least V6.5
By: warrenbrayshaw on Mon, 21 July 2014 23:15
  Re: Frames don't work properly since at least V6.5
By: Walter Spermann on Tue, 22 July 2014 17:07
  Re: Frames don't work properly since at least V6.5
By: Markus Rudolf on Tue, 22 July 2014 18:52
  Re: Frames don't work properly since at least V6.5
By: Jorge Garcia on Tue, 22 July 2014 19:27
  Re: Frames don't work properly since at least V6.5
By: Markus Rudolf on Tue, 22 July 2014 19:55
  Re: Frames don't work properly since at least V6.5
By: Walter Spermann on Wed, 23 July 2014 10:03
  Re: Frames don't work properly since at least V6.5
By: Grzegorz Zalot on Wed, 23 July 2014 11:14
  Re: Frames don't work properly since at least V6.5
By: Markus Rudolf on Wed, 23 July 2014 11:22
  Re: Frames don't work properly since at least V6.5
By: rk on Wed, 23 July 2014 14:00
  Lizenz V7 angehängt auf diese Frage: Version 7.0 licencing
By: geralds on Mon, 14 July 2014 09:18
  Re: Lizenz V7 angehängt auf diese Frage: Version 7.0 licencing
By: Richard Hammerl on Tue, 15 July 2014 07:22
  Re: Lizenz V7 angehängt auf diese Frage: Version 7.0 licencing
By: Gerhard Moll on Thu, 17 July 2014 12:15
  Re: Lizenz V7 angehängt auf diese Frage: Version 7.0 licencing
By: Grzegorz Zalot on Thu, 17 July 2014 13:30
  Re: Lizenz V7 angehängt auf diese Frage: Version 7.0 licencing
By: g.randolf on Tue, 22 July 2014 09:27
  Re: Lizenz V7 angehängt auf diese Frage: Ve rsion 7.0 licencing
By: Gerhard Moll on Wed, 23 July 2014 09:05
  eagle.support.end - posting rejected for spamming ....
By: Grzegorz Zalot on Tue, 22 July 2014 09:00
  Re: eagle.support.end - posting rejected for spamming ....
By: Grzegorz Zalot on Tue, 22 July 2014 10:08
  Freemium use periods not consistent
By: warrenbrayshaw on Tue, 15 July 2014 22:28
  Re: Freemium use periods not consistent
By: Walter Spermann on Wed, 16 July 2014 09:19
  Re: Freemium use periods not consistent
By: warrenbrayshaw on Wed, 16 July 2014 21:27
  Re: Freemium use periods not consistent
By: CadSoft Support on Tue, 22 July 2014 06:10
  Does V7 run in "Freeware" mode when it cannot checkout a license?
By: Markus Rudolf on Tue, 15 July 2014 16:13
  Re: Does V7 run in "Freeware" mode when it cannot checkout a lice...
By: Walter Spermann on Wed, 16 July 2014 08:38
  Version 6
By: Andreas Fecht on Tue, 15 July 2014 09:42
  Re: Version 6
By: Walter Spermann on Tue, 15 July 2014 10:12
  Re: Version 6
By: Andreas Fecht on Tue, 15 July 2014 13:08
  Re: Version 6
By: Walter Spermann on Tue, 15 July 2014 14:13
  Beta version 6.91.2 icons
By: Joern Paschedag on Tue, 15 July 2014 06:07
  New autorouter again ...
By: Grzegorz Zalot on Tue, 15 July 2014 05:47
  6.91.2 autorouter ...
By: Grzegorz Zalot on Sat, 12 July 2014 11:57
  Re: 6.91.2 autorouter ...
By: Walter Spermann on Mon, 14 July 2014 09:18
  Re: 6.91.2 autorouter ...
By: Andrey Plekhanov on Mon, 14 July 2014 11:48
  Re: 6.91.2 autorouter ...
By: rk on Mon, 14 July 2014 12:37
  Re: 6.91.2 autorouter ...
By: Andrey Plekhanov on Mon, 14 July 2014 13:00
  Re: 6.91.2 autorouter ...
By: rk on Mon, 14 July 2014 13:33
  New autorouter's philosophy
By: Andrey Plekhanov on Mon, 14 July 2014 14:39
  Re: New autorouter's philosophy
By: rk on Mon, 14 July 2014 18:39
  Re: 6.91.2 autorouter ...
By: Grzegorz Zalot on Mon, 14 July 2014 12:42
  Re: 6.91.2 autorouter ...
By: Andrey Plekhanov on Mon, 14 July 2014 12:49
  Re: 6.91.2 autorouter ...
By: rk on Mon, 14 July 2014 13:36
  Re: 6.91.2 autorouter ...
By: Andrey Plekhanov on Mon, 14 July 2014 13:43
  Re: 6.91.2 autorouter ...
By: rk on Mon, 14 July 2014 13:55
  Re: 6.91.2 autorouter ...
By: Andrey Plekhanov on Mon, 14 July 2014 14:08
  Re: 6.91.2 autorouter ...
By: Grzegorz Zalot on Mon, 14 July 2014 14:41
  Re: 6.91.2 autorouter ...
By: Grzegorz Zalot on Mon, 14 July 2014 15:28
  inconsistency errors after upgrading to 6.4.1/2 from 6.4
By: Lorenz on Tue, 21 May 2013 14:04
  Re: inconsistency errors after upgrading to 6.4.1/2 from 6.4
By: A. Zaffran on Wed, 22 May 2013 11:20
  Re: inconsistency errors after upgrading to 6.4.1/2 from 6.4
By: Vlad Conut on Mon, 14 July 2014 13:32
  Hierarchy: Top-Down and Bottom-Up
By: PCe on Sun, 13 July 2014 16:35
  Beta version 6.91.2 available
By: Walter Spermann on Mon, 07 July 2014 15:53
  New icons...
By: Doug Wellington on Wed, 18 June 2014 19:25
  Re: New icons...
By: Joern Paschedag on Thu, 19 June 2014 06:58
  Re: New icons...
By: Andreas Fecht on Thu, 19 June 2014 09:20
  Re: New icons...
By: rk on Thu, 19 June 2014 10:09
  Re: New icons...
By: Andreas Fecht on Thu, 19 June 2014 10:52
  Re: New icons...
By: Doug Wellington on Thu, 19 June 2014 19:31
  Re: New icons...
By: CadSoft Support on Tue, 24 June 2014 09:14
  Re: New icons...
By: rk on Tue, 24 June 2014 09:57
  Re: New icons...
By: Markus Rudolf on Fri, 20 June 2014 13:49
  Re: New icons...
By: CadSoft Support on Tue, 24 June 2014 09:19
  Re: New icons...
By: Andreas Fecht on Tue, 24 June 2014 15:53
  Re: New icons...
By: Walter Spermann on Fri, 20 June 2014 08:49
  Re: New icons...
By: Ein User on Fri, 20 June 2014 15:44
  Re: New icons...
By: CadSoft Support on Tue, 24 June 2014 09:45
  Re: New icons...
By: Joern Paschedag on Tue, 24 June 2014 11:08
  Re: New icons...
By: Doug Wellington on Tue, 24 June 2014 17:34
icon8.gif Aw: Re: New icons...
By: noshky on Sun, 06 July 2014 21:12
  Re: New icons...
By: Lorenz on Tue, 24 June 2014 09:57
  Installing Beta 6.9.1 in MacOS X 10.9
By: James Morrison on Tue, 17 June 2014 14:50
  Re: Installing Beta 6.9.1 in MacOS X 10.9
By: Walter Spermann on Wed, 18 June 2014 11:03
  Re: Installing Beta 6.9.1 in MacOS X 10.9
By: Yu-Hung Lien on Fri, 20 June 2014 18:19
  Re: Installing Beta 6.9.1 in MacOS X 10.9
By: Walter Spermann on Mon, 23 June 2014 12:10
  Re: Installing Beta 6.9.1 in MacOS X 10.9
By: Walter Spermann on Thu, 03 July 2014 16:04
  Hierarchy issue - Deleting a non-existing port causes the port to be added
By: PaulG on Wed, 18 June 2014 16:35
  Re: Hierarchy issue - Deleting a non-existing port causes the port to be ad...
By: Walter Spermann on Wed, 18 June 2014 18:03
  Re: Hierarchy issue - Deleting a non-existing port causes the port to be ad...
By: Walter Spermann on Wed, 25 June 2014 18:33
  Beta version 6.91.1 available
By: Walter Spermann on Tue, 17 June 2014 13:55
  Re: Beta version 6.91.1 available
By: Johann Glaser on Wed, 18 June 2014 14:19
  Re: Beta version 6.91.1 available
By: Walter Spermann on Wed, 18 June 2014 14:58
  Re: Beta version 6.91.1 available
By: Johann Glaser on Wed, 18 June 2014 16:31
  Re: Beta version 6.91.1 available
By: Poll-was Poll-was on Thu, 19 June 2014 18:56
  Re: Beta version 6.91.1 available
By: Ein User on Fri, 20 June 2014 15:54
  Re: Beta version 6.91.1 available
By: Poll-was Poll-was on Fri, 20 June 2014 19:01
  Re: Beta version 6.91.1 available
By: Poll-was Poll-was on Sun, 22 June 2014 08:22
  Re: Beta version 6.91.1 available
By: Doug Wellington on Sun, 22 June 2014 18:52
  Re: Beta version 6.91.1 available
By: Poll-was Poll-was on Mon, 23 June 2014 11:15
  Re: Beta version 6.91.1 available
By: Walter Spermann on Mon, 23 June 2014 12:00
  Re: Beta version 6.91.1 available
By: Poll-was Poll-was on Mon, 23 June 2014 12:27
  Re: Beta version 6.91.1 available
By: Walter Spermann on Mon, 23 June 2014 12:42
  CAM Processing - Using quotes in section name causes error
By: PaulG on Wed, 18 June 2014 17:17
  Re: CAM Processing - Using quotes in section name causes error
By: Walter Spermann on Fri, 20 June 2014 10:14
  Hierarchy Issue - dragging sheet after module renames sheet
By: PaulG on Wed, 18 June 2014 19:35
  Re: Hierarchy Issue - dragging sheet after module renames sheet
By: PaulG on Wed, 18 June 2014 19:54
  Re: Hierarchy Issue - dragging sheet after module renames sheet
By: Walter Spermann on Fri, 20 June 2014 10:11
  Re: Hierarchy Issue - dragging sheet after module renames sheet
By: Walter Spermann on Fri, 20 June 2014 10:08
  Beta 6.91.1 hierarchical modules and ports unfinished?
By: Eric Stevens on Tue, 17 June 2014 16:24
  Re: Beta 6.91.1 hierarchical modules and ports unfinished?
By: Walter Spermann on Wed, 18 June 2014 10:02
  Re: Beta 6.91.1 hierarchical modules and ports unfinished?
By: Lorenz on Wed, 18 June 2014 14:11
  Re: Beta 6.91.1 hierarchical modules and ports unfinished?
By: Joern Paschedag on Wed, 18 June 2014 16:35
  Re: Beta 6.91.1 hierarchical modules and ports unfinished?
By: Doug Wellington on Wed, 18 June 2014 17:28
  Beta 6.9.1 Uses Same .eaglerc file as EAGLE v6
By: James Morrison on Tue, 17 June 2014 15:22
  Re: Beta 6.9.1 Uses Same .eaglerc file as EAGLE v6
By: Tilmann Reh on Tue, 17 June 2014 15:44
  Re: Beta 6.9.1 Uses Same .eaglerc file as EAGLE v6
By: Jorge Garcia on Tue, 17 June 2014 18:43
  Re: Beta 6.9.1 Uses Same .eaglerc file as EAGLE v6
By: James Morrison on Tue, 17 June 2014 20:55
  Re: Beta 6.9.1 Uses Same .eaglerc file as EAGLE v6
By: Walter Spermann on Wed, 18 June 2014 10:13
  Is there any beta or preview of Eagle 7.0?
By: David Murphy on Fri, 30 May 2014 15:21
  Re: Is there any beta or preview of Eagle 7.0?
By: Jorge Garcia on Fri, 30 May 2014 20:04
  Re: Is there any beta or preview of Eagle 7.0?
By: Jorge Garcia on Fri, 30 May 2014 20:06
  Re: Is there any beta or preview of Eagle 7.0?
By: David Murphy on Fri, 30 May 2014 22:27
  Re: Is there any beta or preview of Eagle 7.0?
By: David Murphy on Tue, 17 June 2014 20:34
Goto Forum:
  
Legend New Messages New Messages   No New messages No New messages   Locked (w/ unread messages) Locked (w/ unread messages)   Locked Locked   Moved to another forum Moved to another forum

Current Time: Sun Aug 20 02:18:08 GMT 2017