EAGLE Central Forums
Where the EAGLE community meets. Sponsored by Stratford Digital.

Home » CadSoft Support Forums » eagle.support.eng » Eagle - export schematic as part
Eagle - export schematic as part [message #171015] Mon, 24 July 2017 13:07 Go to next message
David Stein
Messages: 2
Registered: July 2017
Junior Member
Hi, it is possible to, by pure eagle or with some scr/ulp export my schematic/board as part what can be used again in other schematic ? For example I got 2mm grid to 2.54mm grid conversion dock board.  And want it use in bigger project. So I need to  "lock" JP1 and JP2. Thanks
[Screenshot - 24.07.2017 , 15_01_57.png]

--
To view any images and attachments in this post, visit:
https://www.element14.com/community/message/225924
Re: Eagle - export schematic as part [message #171016 is a reply to message #171015] Mon, 24 July 2017 13:29 Go to previous messageGo to next message
geralds
Messages: 236
Registered: February 2014
Senior Member
Hi,
the easiest way is to build a schematic - Design Block.
Or you can build it as "macro component" in the Library.

The 2. - please repair trace N$14. You don't need going around the Pinhead.
Sort a bit better all traces. - Then the board will also a bit smaller.

Gerald
---

--
To view any images and attachments in this post, visit:
https://www.element14.com/community/message/225987
Re: Eagle - export schematic as part [message #171020 is a reply to message #171015] Mon, 24 July 2017 23:09 Go to previous messageGo to next message
warrenbrayshaw
Messages: 1767
Registered: January 2010
Location: New Zealand
Senior Member
Hi David

Have a look at this old posting
http://www.eaglecentral.ca/index.php/mv/msg/52816/167859/777d1c48da1c81e160 1daeed0d3f0204/#msg_167859

Using the ULP make-group2pac.ulp You can take your board and export/convert parts of it to be a package in a library. Essentially the outline (which becomes the tPlace) and the pads for the J1 and J2 parts

Then in the library you would create the symbol to appear on the schematic, connect that to the package to make the device.

HTH
Warren

Re: Eagle - export schematic as part [message #171023 is a reply to message #171016] Tue, 25 July 2017 05:38 Go to previous message
David Stein
Messages: 2
Registered: July 2017
Junior Member
Thanks a lot, I was using  old version of eagle so there was no option for design block. I download latest autodesk eagle and works like charm.. Thanks a lot.

--
To view any images and attachments in this post, visit:
https://www.element14.com/community/message/226017
Previous Topic: How can I put a sch in a project?
Next Topic: How do I realign a component/dimension in eagle?
Goto Forum:
  


Current Time: Fri Sep 22 02:38:22 GMT 2017