EAGLE Central Forums
Where the EAGLE community meets. Sponsored by Stratford Digital.

Home » CadSoft Support Forums » eagle.support.eng » need eagle 7.6 library for 470, 680 or 1000uf 50v cap
need eagle 7.6 library for 470, 680 or 1000uf 50v cap [message #168243] Mon, 09 January 2017 03:29 Go to next message
Elliott Jeyaseelan
Messages: 1
Registered: January 2017
Junior Member
hey all,

looking for 470uf or 680uf or 1000uf 50v smd capacitor library from nichicon or panasonic or vishay or similar.

any suggestions or help would much appreciated.

looking to source the part thru element14 or digikey


To view any images and attachments in this post, visit:
Re: need eagle 7.6 library for 470, 680 or 1000uf 50v cap [message #168260 is a reply to message #168243] Tue, 10 January 2017 15:29 Go to previous message
David Pollum
Messages: 177
Registered: April 2005
Location: Virginia, USA
Senior Member
Look in RCL.LBR for polarized caps. CPOL-EU has european style symbols, and CPOL-US has US style symbols. The part # describes the cap's lead spacing and diameter. For example, CPOL-USE2,5-5 is a US style cap, with a 2.54mm (0.1") lead spacing and a 5mm diameter. Lots of other caps are available in the library. Picking a part is a matter of seeing what the vendor has, and if there is a matching EAGLE library part. You can also make your own library part or modify an existing one.
Previous Topic: Hide net labels in board
Next Topic: ULP: When iterating through parts, can I get to nets?
Goto Forum:

Current Time: Wed Oct 18 22:13:39 GMT 2017