EAGLE Central Forums
Where the EAGLE community meets. Sponsored by Stratford Digital.

Home » EAGLE Related Forums, Blogs, ... (Read-Only) » Electronics Lab :: EAGLE Related Articles » How to Create Inverted Silkscreen in Cadsoft Eagle (Electronics Lab :: EAGLE Releated Articles)
How to Create Inverted Silkscreen in Cadsoft Eagle [message #166361] Mon, 25 July 2016 07:46
Yahya Tawil
Messages: 5
Registered: July 2016
Junior Member
If you’re one of EAGLE CAD fans, and you were wondering how some boards like Arduino boards have what’s called a negative silkscreen, hollow rectangles or shapes by text or logo, then you will learn how to do it with Ishaan’s video tutorial.

Ishaan used a ULP called “negasilk.ulp” in his tutorial. It is written by Christian Bohrer, and it can be downloaded here.
We’ve tested  this trick in ElectronicsLab using these steps:

Adding some texts on layer 41tRestrict.
Drawing a rectangular polygon in 1Top layer with width 8 mil (according to Ishaan, this ULP accepts only this width), and don’t forget to hit ratsnest.
Run negasilk.ulp.
A script file is generated in the same directory of your .brd file, open it and make the following modification using any text editor (adding layer 21 line).
Set Wire_Bend 2;
Finally, delete the unwanted polygon and text from layer 41 and layer 1.

You can see these steps in the following GIF(click to view):
Steps to Generate Inverted Silkscreen In Eagle CAD

The post How to Create Inverted Silkscreen in Cadsoft Eagle appeared first on Electronics-Lab.Original article at http://www.electronics-lab.com/create-inverted-silkscreen-cadsoft-eagle/.

-- Web access to CadSoft support forums at www.eaglecentral.ca. Where the CadSoft EAGLE community meets.
Previous Topic: Omniblox – Eagle BRD 3D viewer
Next Topic: Differential Pair Routing and Meander Tool in Eagle CAD
Goto Forum:

Current Time: Tue Oct 17 23:51:08 GMT 2017