EAGLE Central Forums
Where the EAGLE community meets. Sponsored by Stratford Digital.

Home » CadSoft Support Forums » eagle.support.ger » Trouble with the Autoroute function
Trouble with the Autoroute function [message #166158] Sat, 02 July 2016 16:11 Go to next message
Laura Osorio Gonzalez
Messages: 1
Registered: July 2016
Junior Member
Hello there :)


I am working on a project which involves the development of a pressure sensor matrix capable of  pressure mapping the force applied on a patient by a medical instrument.
The active measuring area consists of a matrix of 28 interdigitated electrodes on a PCB.
I am trying to design this, but I am having some trouble with the autorouting.
When i press the function it stays in 0% and doesnt seem to even start the process.
I played around a little with the design rules, but I am pretty new to this whole world and I am sure my problem is somewhere there, I just cannot seem to find it  :0
Unfortunately I cannot attach an EAGLE file here, but if anyone has any idea what it could be and has the time to help me out, please contact me and I will send you the file somewhere else, so you can see my design for yourself.


I hope I am making sense here, and I really hope one of you out there with more experience can help me out!


Thanks a lot for your time

[pastedImage_9.png] [pastedImage_10.png]

--
Um alle Bilder und Anhänge in diesem Beitrag zu sehen, besuchen Sie:
https://www.element14.com/community/message/200715
Re: Trouble with the Autoroute function [message #166168 is a reply to message #166158] Wed, 06 July 2016 06:15 Go to previous messageGo to next message
CadSoft Support
Messages: 542
Registered: September 2006
Senior Member
Am 02.07.2016 um 18:11 schrieb Laura Osorio Gonzalez:
> Hello there :)
>
>
> I am working on a project which involves the development of a pressure sensor matrix capable of pressure mapping the force applied on a patient by a medical instrument.
> The active measuring area consists of a matrix of 28 interdigitated electrodes on a PCB.
> I am trying to design this, but I am having some trouble with the autorouting.
> When i press the function it stays in 0% and doesnt seem to even start the process.
> I played around a little with the design rules, but I am pretty new to this whole world and I am sure my problem is somewhere there, I just cannot seem to find it :0
> Unfortunately I cannot attach an EAGLE file here, but if anyone has any idea what it could be and has the time to help me out, please contact me and I will send you the file somewhere else, so you can see my design for yourself.
>
>
> I hope I am making sense here, and I really hope one of you out there with more experience can help me out!
>
>
> Thanks a lot for your time
>
> [pastedImage_9.png] [pastedImage_10.png]
>
> --
> Um alle Bilder und Anhänge in diesem Beitrag zu sehen, besuchen Sie:
> https://www.element14.com/community/message/200715
>

Das ist die falsche, weil deutsche Newsgroup.


--
Mit freundlichen Gruessen
Richard Hammerl
CadSoft Support -- hotline@cadsoft.de
FAQ: http://www.cadsoft.de/training/faq/
Re: Trouble with the Autoroute function [message #166170 is a reply to message #166158] Wed, 06 July 2016 06:39 Go to previous message
geralds
Messages: 240
Registered: February 2014
Senior Member
Hi,
which eagle you use?
some possibilities:
1) the space on the board is not optimized for placing wires.
2) autorouter strategies, routing grids, one or two sides, wire width and cost are not correct.
3) the parts are not created correct that the router can't find the pins.

Gerald
---

--
Um alle Bilder und Anhänge in diesem Beitrag zu sehen, besuchen Sie:
https://www.element14.com/community/message/200870
Previous Topic: Raster
Next Topic: Quo Vadis Eagle
Goto Forum:
  


Current Time: Mon Oct 16 23:54:57 GMT 2017