EAGLE Central Forums
Where the EAGLE community meets. Sponsored by Stratford Digital.

Home » EAGLE Related Forums, Blogs, ... (Read-Only) » Electronics Lab :: EAGLE Related Articles » Damp-Pi – Room Moisture Extraction with Raspberry Pi (Electronics Lab :: EAGLE Releated Articles)
Damp-Pi – Room Moisture Extraction with Raspberry Pi [message #163205] Mon, 07 September 2015 09:31
Electronics Lab
Messages: 19
Registered: September 2015
Junior Member

by davidhunt.ie :
Over the last while I’ve been having a problem with excess humidity in the shower rooms. Imagine that, the builder never put in extractor fans when the house was built! Anyway, I could put in those fancy extractor fans with the built in timers or humidity sensors, but I decided to do things the more interesting way, by using a small computer to read the values from a humidity sensor in each room, and based on the readings, turn on the fan until the humidity was reduced to an acceptable level.
I happened to have several spare Raspberry Pi’s lying around, so that’s what I used for this project. But there’s nothing stopping you using an Intel Edison, Intel Galileo, Creater CI20, Beagleone Black, Beaglebone green, etc. Use whatever you’re comfortable with.
Damp-Pi – Room Moisture Extraction with Raspberry Pi – [Link]
The post Damp-Pi – Room Moisture Extraction with Raspberry Pi appeared first on Electronics-Lab.Original article at http://www.electronics-lab.com/damp-pi-room-moisture-extraction-with-raspberry-pi/.

-- Web access to CadSoft support forums at www.eaglecentral.ca. Where the CadSoft EAGLE community meets.
Previous Topic: EAGLE BOM generation script
Next Topic: Logic PCB Business Card
Goto Forum:
  


Current Time: Mon Apr 24 17:13:52 GMT 2017