EAGLE Central Forums
Where the EAGLE community meets. Sponsored by Stratford Digital.

Home » CadSoft Support Forums » eagle.userchat.eng » Removing islolation from holes
Removing islolation from holes [message #161842] Sat, 11 July 2015 10:35 Go to next message
Damanjit Singh
Messages: 2
Registered: July 2015
Junior Member
Hi, I have a touch pad which I drew with the help of a polygon. I need a
hole in it, but no isolation or minimum isolation. Can someone help
please?
I have attached my current screen view, the isolation is too big
currently and making changes in the isolation field does not have any
effect. Thanks in advance! [Screen Shot 2015-07-11 at 11.29.46.png]

--
To view any images and attachments in this post, visit:
http://www.element14.com/community/message/154584
Re: Removing islolation from holes [message #161844 is a reply to message #161842] Sat, 11 July 2015 11:42 Go to previous messageGo to next message
Guillaume barrey[1]
Messages: 260
Registered: July 2013
Senior Member
hi,

You can reduce the clearance in DRC, open the 'Distance' tab, and reduce
the 'Copper / Dimension' parameter: it's the distance between the copper
and the edge of the PCB (works for anything you draw in Dimension layer
and for holes).

Guillaume.

--
To view any images and attachments in this post, visit:
http://www.element14.com/community/message/154585
Re: Removing islolation from holes [message #161846 is a reply to message #161844] Sat, 11 July 2015 11:45 Go to previous message
Damanjit Singh
Messages: 2
Registered: July 2015
Junior Member
Thanks a lot.

--
To view any images and attachments in this post, visit:
http://www.element14.com/community/message/154616
Previous Topic: Copy tool loses window focus, requiring two clicks instead of one
Next Topic: Generating reference holes for double sided PCB
Goto Forum:
  


Current Time: Sat Aug 19 11:00:48 GMT 2017