EAGLE Central Forums
Where the EAGLE community meets. Sponsored by Stratford Digital.

Home » CadSoft Support Forums » eagle.betatest » CAM Processing - Using quotes in section name causes error
CAM Processing - Using quotes in section name causes error [message #155882] Wed, 18 June 2014 17:17 Go to next message
PaulG
Messages: 4
Registered: June 2014
Junior Member
Hi:

In a CAM job, if a section is added and named with a quote

Section: Board "DD"

it will be corrupted when the job is saved and reloaded. An error will
pop up indicating that a "Missing closing '"' is causing a problem.
It then shows up with a different language encoding and the file output
is screwed up.

Just checked in v6.5.0 - it exists there as well.


I've attached a cam file without the quoted text and also one with the
quoted text.

The only difference in the cam job xml file is:

[Sec_1]
Name[de]="Bestückungsseite"
Name[en]="Board"
Prompt=""

becomes:

[Sec_1]
Name[de]="Bestückungsseite"
Name[en]="Board \"DD\""
Prompt=""




Software version: Eagle 6.91.1 for Windows
OS Info: Win7/SP1

-Paul

[CAM Processor Job]
Description[de]="<b>Erzeugt Extended-Gerber-Format (RS274X) für eine 4-Lagen-Platine</b><p>\nDieser CAM-Job besteht aus zehn Schritten und erzeugt Fertigungsdaten für eine vierlagige Platine.<br>Achtung: Die Innenlagen werden als normale Innenlagen, nicht als Supply-Layer behandelt! <p><p>\nDie zehn Gerberdateien enthalten Daten für:<br>\nBestückungsseite *.cmp<br>\nLayer 2 (kein Supply-Layer!) *.ly2<br>\nLayer 15 (kein Supply-Layer!) *.l15<br>\nLötseite *.sol<br>\nBestückungsdruck oben *.plc<br>\nBestückungsdruck unten *.pls<br>\nLötstoplack Bestückungsseite *.stc<br>\nLötstoplack Lötseite *.sts<br>\nLotpastenmaske Bestückungsseite *.crc<br>\nLotpastenmaske Lötseite *.crs<br>"
Description[en]="<b>Generates Extended Gerber Format for a 4 layer board</b><p>\nThis CAM job consists of ten sections that generate data for a four layer board.<br>Note: The inner layers are treated as normal signal layers, not as supply layers!<p><p>\nYou will get ten Gerber files that contain data for:<br>\ncomponent side *.cmp<br>\ninner layer 2 (no supply layer!) *.ly2<br>\ninner layer 15 (no supply layer!) *.l15<br>\nsolder side *.sol<br>\nsilkscreen component side *.plc<br>\nsilkscreen solder side *.pls<br>\nsolder stop component side *.stc<br>\nsolder stop solder side *.sts<br>\ncream frame component side *.crc<br>\ncream frame solder side *.crs<br>"
Section=Sec_1
Section=Sec_2
Section=Sec_3
Section=Sec_4
Section=Sec_5
Section=Sec_6
Section=Sec_7
Section=Sec_8
Section=Sec_9
Section=Sec_10
Section=Sec_11
Section=Sec_12
Section=Sec_13

[Sec_1]
Name[de]="Bestückungsseite"
Name[en]="Board \"DD\""
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_BRD_DesignDrawing.dd"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 20 48 144 145 146"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_2]
Name[de]="Bestückungsseite"
Name[en]="Top Metal Layer: Also called Component Side"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_G01_TopMetal.cmp"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 1 17 18"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_3]
Name[de]="Innenlage - Layer2"
Name[en]="Inner Layer 2"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_G02_Inner02.ly2"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 2 17 18"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_4]
Name[de]="Innenlage - Layer2"
Name[en]="Inner Layer 3"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_G03_Inner03.ly3"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 3 17 18"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_5]
Name[de]="Innenlage - Layer2"
Name[en]="Inner Layer 4"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_G04_Inner04.ly4"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 4 17 18"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_6]
Name[de]="Innenlage - Layer15"
Name[en]="Inner Layer 5"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_G05_Inner05.ly5"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 5 17 18"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_7]
Name[de]="Lötseite"
Name[en]="Bottom Metal Layer: Also Called Solder Side"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_G06_Bottom.sol"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 16 17 18"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_8]
Name[de]="Bestückungsdruck oben"
Name[en]="Silk Screen Top"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_SST_SilkScreenTop.plc"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 20 21 25"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_9]
Name[de]="Bestückungsdruck unten"
Name[en]="Silk Screen Bottom"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_SSB_SilkBottom.pls"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 20 22 26"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_10]
Name[de]="Lötstopmaske Bestückungsseite"
Name[en]="Solder Mask Top: Also called stop mask TOP"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_SMT_SolderMaskTop.stc"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 29"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_11]
Name[de]="Lötstopmaske Lötseite"
Name[en]="Solder Mask Bottom: Also called stop mask Bottom"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_SMB_SolderMaskBottom.sts"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 30"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_12]
Name[de]="Lotpastenmaske oben"
Name[en]="Solder Paste Top"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_SPT_SolderPasteTop.crc"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 31"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_13]
Name[de]="Lotpastenmaske unten"
Name[en]="Solder Paste Bottom"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_SPB_SolderPasteBottom.crs"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 32"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[CAM Processor Job]
Description[de]="<b>Erzeugt Extended-Gerber-Format (RS274X) für eine 4-Lagen-Platine</b><p>\nDieser CAM-Job besteht aus zehn Schritten und erzeugt Fertigungsdaten für eine vierlagige Platine.<br>Achtung: Die Innenlagen werden als normale Innenlagen, nicht als Supply-Layer behandelt! <p><p>\nDie zehn Gerberdateien enthalten Daten für:<br>\nBestückungsseite *.cmp<br>\nLayer 2 (kein Supply-Layer!) *.ly2<br>\nLayer 15 (kein Supply-Layer!) *.l15<br>\nLötseite *.sol<br>\nBestückungsdruck oben *.plc<br>\nBestückungsdruck unten *.pls<br>\nLötstoplack Bestückungsseite *.stc<br>\nLötstoplack Lötseite *.sts<br>\nLotpastenmaske Bestückungsseite *.crc<br>\nLotpastenmaske Lötseite *.crs<br>"
Description[en]="<b>Generates Extended Gerber Format for a 4 layer board</b><p>\nThis CAM job consists of ten sections that generate data for a four layer board.<br>Note: The inner layers are treated as normal signal layers, not as supply layers!<p><p>\nYou will get ten Gerber files that contain data for:<br>\ncomponent side *.cmp<br>\ninner layer 2 (no supply layer!) *.ly2<br>\ninner layer 15 (no supply layer!) *.l15<br>\nsolder side *.sol<br>\nsilkscreen component side *.plc<br>\nsilkscreen solder side *.pls<br>\nsolder stop component side *.stc<br>\nsolder stop solder side *.sts<br>\ncream frame component side *.crc<br>\ncream frame solder side *.crs<br>"
Section=Sec_1
Section=Sec_2
Section=Sec_3
Section=Sec_4
Section=Sec_5
Section=Sec_6
Section=Sec_7
Section=Sec_8
Section=Sec_9
Section=Sec_10
Section=Sec_11
Section=Sec_12
Section=Sec_13

[Sec_1]
Name[de]="Bestückungsseite"
Name[en]="Board"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_BRD_DesignDrawing.dd"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 20 48 144 145 146"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_2]
Name[de]="Bestückungsseite"
Name[en]="Top Metal Layer: Also called Component Side"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_G01_TopMetal.cmp"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 1 17 18"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_3]
Name[de]="Innenlage - Layer2"
Name[en]="Inner Layer 2"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_G02_Inner02.ly2"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 2 17 18"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_4]
Name[de]="Innenlage - Layer2"
Name[en]="Inner Layer 3"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_G03_Inner03.ly3"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 3 17 18"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_5]
Name[de]="Innenlage - Layer2"
Name[en]="Inner Layer 4"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_G04_Inner04.ly4"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 4 17 18"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_6]
Name[de]="Innenlage - Layer15"
Name[en]="Inner Layer 5"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_G05_Inner05.ly5"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 5 17 18"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_7]
Name[de]="Lötseite"
Name[en]="Bottom Metal Layer: Also Called Solder Side"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_G06_Bottom.sol"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 16 17 18"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_8]
Name[de]="Bestückungsdruck oben"
Name[en]="Silk Screen Top"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_SST_SilkScreenTop.plc"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 20 21 25"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_9]
Name[de]="Bestückungsdruck unten"
Name[en]="Silk Screen Bottom"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_SSB_SilkBottom.pls"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 20 22 26"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_10]
Name[de]="Lötstopmaske Bestückungsseite"
Name[en]="Solder Mask Top: Also called stop mask TOP"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_SMT_SolderMaskTop.stc"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 29"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_11]
Name[de]="Lötstopmaske Lötseite"
Name[en]="Solder Mask Bottom: Also called stop mask Bottom"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_SMB_SolderMaskBottom.sts"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 30"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_12]
Name[de]="Lotpastenmaske oben"
Name[en]="Solder Paste Top"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_SPT_SolderPasteTop.crc"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 31"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_13]
Name[de]="Lotpastenmaske unten"
Name[en]="Solder Paste Bottom"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%P/../Layout/Board/%N_SPB_SolderPasteBottom.crs"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 32"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"
  • Attachment: Bad.cam
    (Size: 12.71KB, Downloaded 642 times)
  • Attachment: Good.cam
    (Size: 12.71KB, Downloaded 578 times)
Re: CAM Processing - Using quotes in section name causes error [message #155921 is a reply to message #155882] Fri, 20 June 2014 10:14 Go to previous message
Walter Spermann
Messages: 540
Registered: August 2010
Senior Member
Hi,

On 06/18/14 19:17, PaulG wrote:
> Hi:
>
> In a CAM job, if a section is added and named with a quote
>
> Section: Board "DD"
>
> it will be corrupted when the job is saved and reloaded. An error will pop up indicating that a "Missing closing '"' is
> causing a problem.
> It then shows up with a different language encoding and the file output is screwed up.
>
> Just checked in v6.5.0 - it exists there as well.
>
>
> I've attached a cam file without the quoted text and also one with the quoted text.
actually that was already in V6.0. We'll take care for this.

Regards,
Walter Spermann

>
> The only difference in the cam job xml file is:
>
> [Sec_1]
> Name[de]="Bestückungsseite"
> Name[en]="Board"
> Prompt=""
>
> becomes:
>
> [Sec_1]
> Name[de]="Bestückungsseite"
> Name[en]="Board \"DD\""
> Prompt=""
>
>
>
>
> Software version: Eagle 6.91.1 for Windows
> OS Info: Win7/SP1
>
> -Paul


--
---------------------------------------------------------------
Walter Spermann
Lead Developer
CadSoft Computer GmbH
Pleidolfweg 15
84568 Pleiskirchen
Tel.: 08635/6989-10
www.cadsoft.de
---------------------------------------------------------------
Registergericht: Amtsgericht Traunstein HRB 5573
Geschäftsführer: Thomas Liratsch
---------------------------------------------------------------
Besuchen Sie uns auf der embedded world!
25.-27. Februar in Nürnberg
Halle 5, Stand 249
Previous Topic: Hierarchy Issue - dragging sheet after module renames sheet
Next Topic: Beta version 6.91.1 available
Goto Forum:
  


Current Time: Mon May 01 02:23:49 GMT 2017