EAGLE Central Forums
Where the EAGLE community meets. Sponsored by Stratford Digital.

Home » EAGLE Related Forums, Blogs, ... (Read-Only) » Electronics Lab :: EAGLE Related Articles » Reflow Oven Controller with graphics TFT (Electronics Lab :: EAGLE Releated Articles)
Reflow Oven Controller with graphics TFT [message #155873] Wed, 18 June 2014 11:50
admin
Messages: 124
Registered: November 2008
Senior Member
Administrator

0xPIT @ github.com writes:
This Reflow Oven Controller relies on an Arduino Pro Micro, which is similar to the Leonardo and easily obtainable on eb*y for less than $10, plus my custom shield, which is actually more like a motherboard.
As I believe it is not wise to have a mess of wiring and tiny breakout-boards for operating mains powered equipment, I’ve decided to design custom board with easily obtainable components.
The hardware can be found in the folder hardware, including the Eagle schematics and PCB layout files. It should fit the freemium version of Eagle
Reflow Oven Controller with graphics TFT - [Link]Original article at http://www.electronics-lab.com/blog/?p=29280.

-- Web access to CadSoft support forums at www.eaglecentral.ca. Where the CadSoft EAGLE community meets.
Previous Topic: Place your BeagleBone or Raspberry Pi into a stylish enclosure
Next Topic: WEBENCH now with PCB Export
Goto Forum:
  


Current Time: Thu Aug 17 05:53:31 GMT 2017