EAGLE Central Forums
Where the EAGLE community meets. Sponsored by Stratford Digital.

Home » EAGLE Related Forums, Blogs, ... (Read-Only) » Element 14 :: EAGLE Related Posts » Eagle: Having blocks of components in schematics interconnected (Element 14 :: EAGLE Related Posts)
Eagle: Having blocks of components in schematics interconnected [message #155703] Wed, 04 June 2014 13:56 Go to next message
messages@element14.co
Messages: 380
Registered: March 2013
Senior Member
Hi again, I need to have something like other similar CAD software has - I need to split schematics into few logical units (blocks) with some components in it. Then, I would like to connect those blocks (logical units) with relevant interconnecting wires. Then when I come to PCB design, I need to be able to Autoroute within one of these Blocks or some of them or all of them. Then, to manually route between these blocks...or again to use autorouter only on connecting blocks... I think you have a picture what I mean. Does Eagle has such option in any of its menus? Thank you.Original article at http://www.element14.com/community/message/115193?tstart=0#115193.

-- Web access to CadSoft support forums at www.eaglecentral.ca. Where the CadSoft EAGLE community meets.
Re: Eagle: Having blocks of components in schematics interconnected [message #155720 is a reply to message #155703] Thu, 05 June 2014 12:57 Go to previous message
messages@element14.co
Messages: 380
Registered: March 2013
Senior Member
Hi, this feature (hierarchical schematic design) is planned for new EAGLE V7 which shall be released later this year. Best regards,Richard HammerlOriginal article at http://www.element14.com/community/message/115364?tstart=0#115364.

-- Web access to CadSoft support forums at www.eaglecentral.ca. Where the CadSoft EAGLE community meets.
Previous Topic: Eagle: Cannot have "Ground Plane" on Bottom layer!?
Next Topic: Nicht-runde Pins
Goto Forum:
  


Current Time: Wed Apr 26 13:41:13 GMT 2017