EAGLE Central Forums
Where the EAGLE community meets. Sponsored by Stratford Digital.

Home » CadSoft Support Forums » eagle.suggest.ger » More detailed DRC error reporting
More detailed DRC error reporting [message #155664] Tue, 03 June 2014 08:17
ckuhlmann
Messages: 5
Registered: August 2012
Junior Member
Currently, the DRC settings differentiate between same signal and
different signals, but the error report does not. This is unfortunate,
since same signal violations are often far less severe than different
signal violations. It would be great if eagle could generate a more
detailed report (e.g.
Clearance: Same signal (GND), Objects (Via, Trace), Layer 16
Clearance: Same signal (GND), Objects (Via, Pad), Layer 16
Clearance: Signals (GND, +5V), Objects (Via, IC 15 Pad), Layer 16 
Overlap: Same signal (GND), Objects (Via, IC 15 Pad), Layer 16     
Overlap: Signals (GND, +5V), Objects (Via, C 5 Pad), Layer 16@   
etc.)

Especially with polygon pours it is often difficult to determine which
are the offending objects. This improvement would also allow to skip
multiple errors for different segments of the same trace and would
improve error handling.

--
Um alle Bilder und Anhänge in diesem Beitrag zu sehen, besuchen Sie:
http://www.element14.com/community/message/114991
Previous Topic: Clearance zwischen Netzklassen in Abhängigkeit von Lage
Next Topic: Xref mit direction
Goto Forum:
  


Current Time: Fri Apr 28 06:17:57 GMT 2017