EAGLE Central Forums
Where the EAGLE community meets. Sponsored by Stratford Digital.

Home » EAGLE Related Forums, Blogs, ... (Read-Only) » Electronics Lab :: EAGLE Related Articles » Tiny Touch Button (Electronics Lab :: EAGLE Releated Articles)
Tiny Touch Button [message #151317] Mon, 17 June 2013 14:48
admin
Messages: 124
Registered: November 2008
Senior Member
Administrator

With LEDs that require only one pin, you can do a lot with even just a 6-pin microcontroller!
A touch controlled light with 4xWS2812 RGB LEDs and ATtiny10. This is a small hardware project which utilizes the light_WS2812 library and the TinyTouchLib to implement a touch-button controlled RGB-LED light. Only two output pins of the ATtiny10 are used. Atmel Studio project and Eagle files are included.
[via]
Tiny Touch Button - [Link]Original article at http://www.electronics-lab.com/blog/?p=22132.

-- Web access to CadSoft support forums at www.eaglecentral.ca. Where the CadSoft EAGLE community meets.
Previous Topic: Circuit Board Design for Beginners
Next Topic: Tiny Touch Button
Goto Forum:
  


Current Time: Mon Jul 24 06:36:46 GMT 2017