EAGLE Central Forums
Where the EAGLE community meets. Sponsored by Stratford Digital.

Home » CadSoft Support Forums » eagle.support.eng
All accounts are READ-ONLY by default In order to post, first register and then email your user ID to perms@eaglecentral.ca.

    Replies Views Last message
  Re: The majority of components can connect, but some pins still do not work right. They do not want to connect with wire. Please help.
By: Graham Wideman on Thu, 16 July 2015
0 3487 Thu, 16 July 2015 22:28
By: Graham Wideman
  DesignLink output with designators?
By: Joerg on Fri, 03 July 2015
4 3161 Wed, 15 July 2015 20:57
By: Joerg
  The majority of components can connect, but some pins still do not work right. They do not want to connect with wire. Please help.
By: Sonia XXX on Wed, 15 July 2015
1 1759 Wed, 15 July 2015 16:23
By: shabaz
  Can attributes in schematic be changed for all parts of same value?
By: Joerg on Tue, 07 July 2015
10 3736 Tue, 14 July 2015 17:29
By: Joerg
  Eagle 7.3 OSX scrool
By: Ovidiu Hossu on Tue, 12 May 2015
16 6847 Tue, 14 July 2015 07:03
By: Richard Hammerl
  Printing in color Eagle 7.3 64bit
By: Expecon on Sun, 12 July 2015
1 1901 Sun, 12 July 2015 23:36
By: jaanus
  Can I test for "outline mode" or "real mode" of polygons?
By: Paul Badger on Fri, 10 July 2015
6 2563 Sat, 11 July 2015 22:18
By: Paul Badger
  Clearence error on pin connector
By: Manuel Pereira on Fri, 10 July 2015
2 3524 Sat, 11 July 2015 11:36
By: Olin
  I'd like to find the power and video input on a screen i took out of an old phone.
By: Andrew Lussier on Thu, 09 July 2015
2 2156 Fri, 10 July 2015 08:21
By: Michael Kellett
  Eagle PCB making pad difficult
By: Joel Godin on Wed, 08 July 2015
4 2430 Thu, 09 July 2015 08:16
By: Morten Leikvoll
  ATMEGA644P-20PQ
By: Ricardo Espinoza on Thu, 09 July 2015
1 1910 Thu, 09 July 2015 07:59
By: Michael Kellett
  Licensing question for 4 layer board.
By: darryl goldberg on Wed, 08 July 2015
2 2185 Wed, 08 July 2015 19:52
By: darryl goldberg
  Eagle Program Default Settings
By: Nicholas Ca on Wed, 08 July 2015
1 1945 Wed, 08 July 2015 18:03
By: Jorge Garcia
  74xx-little-us library part mislabeled
By: David Anders on Sun, 05 July 2015
1 2303 Tue, 07 July 2015 21:49
By: Jorge Garcia
  Mac Version of Eagle crashing very often
By: Paul Badger on Mon, 06 July 2015
1 2232 Tue, 07 July 2015 21:20
By: Jorge Garcia
  Autorouter not working
By: Juan Nuncio on Fri, 03 July 2015
2 2149 Tue, 07 July 2015 16:00
By: Juan Nuncio
  Beagle board or raspberry pi??
By: Nivedita Gaur on Tue, 07 July 2015
3 2259 Tue, 07 July 2015 12:52
By: element14jamie
  6 PIN MINI-DIN PCB CONNECTOR
By: Paulo Borensztein on Mon, 06 July 2015
0 2649 Mon, 06 July 2015 21:17
By: Paulo Borensztein
  Can you add thermal area to a package?
By: alank2 on Fri, 03 July 2015
5 2585 Mon, 06 July 2015 19:28
By: warrenbrayshaw
  LASCAR EL-USB-TC-LCD DATA LOGGER, -200DEG TO 1350DEG, USB,LCD
By: FEDERICA FABIANI on Mon, 06 July 2015
0 2526 Mon, 06 July 2015 13:42
By: FEDERICA FABIANI
  BRADY 65674 LOCKOUT, PLUG, ELECTRICAL, SMALL
By: Bob Barr on Mon, 06 July 2015
2 2076 Mon, 06 July 2015 12:49
By: Paul Ellison
  Add operations in coordinates
By: Marco Trapanese on Fri, 03 July 2015
10 3419 Mon, 06 July 2015 11:05
By: Guillaume barrey[1]
  SMD pad with a void in the copper
By: John Alexander on Sat, 04 July 2015
0 2446 Sat, 04 July 2015 08:56
By: John Alexander
  RIPUP command line in 7.2 & 7.3
By: Bruce Mellen on Tue, 30 June 2015
6 3519 Fri, 03 July 2015 12:29
By: Bruce Mellen
  Eagle ERC error.....
By: ezflyr on Mon, 29 June 2015
7 4670 Thu, 02 July 2015 22:45
By: warrenbrayshaw
  Plane ground bottom pads
By: Par Free on Tue, 30 June 2015
11 3834 Wed, 01 July 2015 15:02
By: ezflyr
  From within a ULP, ensure that no object has the Group flag set
Modifying Drillegend-stack.ulp to delete old output
By: evgueni on Wed, 01 July 2015
4 3450 Wed, 01 July 2015 14:29
By: evgueni
  How to create power planes for this high speed mixed signal board and connect them together in Eagle PCB?
By: Hassan Iqbal on Tue, 30 June 2015
2 3181 Wed, 01 July 2015 10:56
By: Olin
  Paste broken in Mac version of Eagle 7.3.0?
By: Paul Badger on Tue, 23 June 2015
2 2148 Tue, 30 June 2015 20:58
By: Paul Badger
  Internet Browser
By: temp leong on Tue, 30 June 2015
1 2394 Tue, 30 June 2015 14:06
By: Lorenz
  SMD package for capacitors 1206 bigger than 1608
By: Par Free on Mon, 29 June 2015
3 2679 Tue, 30 June 2015 07:19
By: Morten Leikvoll
  Components not available in ST Micro-electronics library?
By: Pranav V on Tue, 30 June 2015
0 2498 Tue, 30 June 2015 05:11
By: Pranav V
  Problem with package which does not have device or symbol
By: Eugeny on Fri, 26 June 2015
4 3623 Mon, 29 June 2015 20:20
By: Jorge Garcia
  XBox 360 Kinect
By: Roy Marshall on Mon, 29 June 2015
0 2495 Mon, 29 June 2015 18:02
By: Roy Marshall
  Re: Export Schematic Image in High Resolution
By: Flavio Espindula on Wed, 17 June 2015
3 2560 Mon, 29 June 2015 16:01
By: Jorge Garcia
  Re: BeagleBone black
By: Darin Masov on Mon, 29 June 2015
1 2352 Mon, 29 June 2015 15:33
By: shabaz
  Books about Eagle Cad
By: Prajjwal Nag on Fri, 26 June 2015
5 3907 Mon, 29 June 2015 14:35
By: CadSoft Support
  BeagleBone black
By: Darin Masov on Mon, 29 June 2015
1 2520 Mon, 29 June 2015 14:00
By: shabaz
  Is the LTC1047 chopper amp a good candiate for a drop-in replacement for the LT1013 generic amp
By: Charles Davis on Sat, 27 June 2015
2 3509 Mon, 29 June 2015 13:31
By: Michael Kellett
  BEGINNER
By: charles osei on Sun, 28 June 2015
1 2483 Sun, 28 June 2015 22:09
By: eaglecandies
  Where can I download Eagle CADSoft library?
By: leah bayugo on Thu, 25 June 2015
1 2410 Fri, 26 June 2015 05:41
By: Lorenz
  Problem creating a through hole part no pins show up when trying to connect pads to pins in device - eagle 7p3
By: Gary Mitchell on Thu, 25 June 2015
1 2405 Thu, 25 June 2015 22:31
By: warrenbrayshaw
  Circular trace does not connect.
By: Tee One Dee on Tue, 23 June 2015
13 4046 Thu, 25 June 2015 21:18
By: Tee One Dee
  How to draw a closed wire in the shape of an ellipse?
By: Joop14 on Thu, 25 June 2015
3 2666 Thu, 25 June 2015 15:28
By: Joop14
  Using exp-lbrs.ulp
By: Tomas Bergh on Tue, 23 June 2015
5 2515 Thu, 25 June 2015 06:46
By: Tomas Bergh
  "Board and schematic are not consistent" v4.16r2
By: Karl Lautman on Thu, 25 June 2015
2 1970 Thu, 25 June 2015 04:56
By: Joern Paschedag
  SIM800E Eagle Library
By: Giulio Loffreda on Wed, 24 June 2015
1 1927 Thu, 25 June 2015 01:28
By: warrenbrayshaw
  DesignLink does not work right
By: Joerg on Sat, 13 June 2015
6 2902 Wed, 24 June 2015 23:31
By: Joerg
  How do I create a label on a net
By: Andy Clark on Wed, 24 June 2015
4 1902 Wed, 24 June 2015 22:16
By: Andy Clark
  Reaching parts in ulp
By: Tomas Bergh on Wed, 24 June 2015
2 2378 Wed, 24 June 2015 08:17
By: Tomas Bergh
  how to boot QNX OS iamge from bootload uboot
By: Dustin Zhu on Wed, 24 June 2015
1 1954 Wed, 24 June 2015 05:42
By: Lorenz
  Eagle 7.3.0 font rendering broken on Linux
By: Herbert Poetzl on Sat, 16 May 2015
14 5447 Tue, 23 June 2015 17:46
By: madires
  I have 2 1/2 car garage with nine foot ceiling with work bench. Would like recommendaton for installaion of ceiling light that will provide goodst bright
By: Rotchy Barker on Tue, 23 June 2015
1 1601 Tue, 23 June 2015 16:44
By: David Pettit
  LT1769 Lead acid battery charger
By: nico balas on Tue, 23 June 2015
1 1842 Tue, 23 June 2015 14:59
By: shabaz
  Creating / viewing 3D models for components?
By: Mike Edmans on Mon, 22 June 2015
1 1626 Tue, 23 June 2015 10:48
By: Guillaume barrey[1]
  Need license to move to 64 bit Linux.
By: David Smead on Thu, 11 June 2015
9 3168 Mon, 22 June 2015 15:56
By: Jorge Garcia
  7583222 ALUPLUS TOOLCASE 18
By: Lina Kundrotait on Mon, 22 June 2015
2 1822 Mon, 22 June 2015 14:13
By: Paul Ellison
  Looping over wires with UL_BOARD.wires(..)
By: f sch on Mon, 22 June 2015
3 1892 Mon, 22 June 2015 09:53
By: f sch
  question concerning multicomp dc motors
By: dudu tech on Fri, 19 June 2015
2 2040 Mon, 22 June 2015 08:12
By: Johan Berg, van de
  Polygon
By: Herv Nonon on Sat, 13 June 2015
5 2169 Sun, 21 June 2015 18:12
By: Guillaume barrey[1]
  How remove ALLS attribute of ALLS component of schematic... not ONE by ONE
By: pasolini on Tue, 02 June 2015
2 2189 Sun, 21 June 2015 10:21
By: pasolini
  CNC HELP
By: Juan Salgado on Fri, 19 June 2015
2 3330 Sat, 20 June 2015 23:57
By: Juan Salgado
  Recover key file
By: Enzo Fiorillo on Sat, 20 June 2015
1 1594 Sat, 20 June 2015 15:15
By: Joern Paschedag
  Make ULP exit in the Board window with a desired tool selected?
By: Paul Badger on Thu, 18 June 2015
10 2629 Sat, 20 June 2015 09:31
By: Paul Badger
  I have a product that requires electronics
By: shani burton on Fri, 19 June 2015
2 1589 Fri, 19 June 2015 20:17
By: shani burton
  schematic ref des reassignment
By: tim wilkerson on Tue, 16 June 2015
1 1638 Fri, 19 June 2015 10:22
By: CadSoft Support
  Mac OS X trackpad panning broken in 7.3.0
By: Sean Rieb on Tue, 16 June 2015
1 1897 Fri, 19 June 2015 10:21
By: CadSoft Support
  Renaming a component error
By: Pavan Tiruveedhula on Mon, 15 June 2015
11 2857 Fri, 19 June 2015 09:13
By: Clem Martins
  Beaglebone black CE marking
By: mercedes fuentes on Thu, 18 June 2015
2 1882 Fri, 19 June 2015 06:21
By: A. Zaffran
  Set Attributes for package?
By: Thor Johnson on Thu, 18 June 2015
1 1598 Fri, 19 June 2015 06:19
By: A. Zaffran
  Import P-CAD schematics/layouts into EAGLE?
By: Marco Espinoza on Thu, 18 June 2015
1 1819 Fri, 19 June 2015 06:16
By: A. Zaffran
  How can I get category data for this product by Api
By: Denis Zhilkov on Thu, 18 June 2015
3 1806 Fri, 19 June 2015 06:12
By: A. Zaffran
  Finding Pin 1 on Eagle?
By: Marissa Garcia on Wed, 17 June 2015
2 1723 Thu, 18 June 2015 06:44
By: Morten Leikvoll
  Dimension Value Backwards
By: hawkeye Johnson on Wed, 17 June 2015
1 1617 Wed, 17 June 2015 21:36
By: hawkeye Johnson
  "SMD Buss Bar"
By: Steve Kale on Wed, 17 June 2015
2 1611 Wed, 17 June 2015 16:58
By: Steve Kale
  4 layer PCB designing
By: Agnibha Mukhopadhyay on Tue, 02 June 2015
1 2934 Wed, 17 June 2015 14:27
By: not-real
  Export Schematic Image in High Resolution
By: Flavio Espindula on Mon, 15 June 2015
10 2542 Wed, 17 June 2015 13:50
By: Flavio Espindula
  Route new wires
By: Par Free on Wed, 17 June 2015
1 1692 Wed, 17 June 2015 11:33
By: Morten Leikvoll
  any good ebook guides for Eagle?
By: Logyx on Thu, 04 June 2015
5 3581 Wed, 17 June 2015 10:17
By: Logyx
  Functionality issues with SHOW command
By: John Miles on Tue, 16 June 2015
0 1629 Tue, 16 June 2015 21:28
By: John Miles
  Out of memory while writing high res .tif file
By: Anthony Rolando on Tue, 16 June 2015
1 1383 Tue, 16 June 2015 19:21
By: Anthony Rolando
  Eagle library files?
By: Marissa Garcia on Tue, 16 June 2015
2 1589 Tue, 16 June 2015 16:13
By: Marissa Garcia
  mill-outlines crashing
By: Re F on Tue, 16 June 2015
0 1682 Tue, 16 June 2015 14:10
By: Re F
  CLEARANCE ERROR
By: Par Free on Sun, 14 June 2015
1 1772 Sun, 14 June 2015 13:38
By: Clem Martins
  Eagle CAD Non-circle through hole pads?
By: chris spurrier on Tue, 07 April 2015
7 5376 Sun, 14 June 2015 08:22
By: Eugeny
  Pad with complex hole
By: Eugeny on Fri, 12 June 2015
6 2154 Sat, 13 June 2015 23:08
By: eaglecandies
  Exported .drl file same drill size problem
By: Rodrigo Rodrigues on Fri, 12 June 2015
0 2318 Fri, 12 June 2015 14:15
By: Rodrigo Rodrigues
  Moving current drawing window unsuable on 7.3 / linux
By: Guillaume barrey[1] on Sun, 17 May 2015
5 3285 Fri, 12 June 2015 10:16
By: CadSoft Support
  Trying to identify connectors but failing
By: Leigh Brady on Thu, 11 June 2015
4 2158 Fri, 12 June 2015 08:44
By: Morten Leikvoll
  Mouse too sensitive
By: ctdeveloper on Thu, 11 June 2015
1 1764 Fri, 12 June 2015 05:19
By: Lorenz
  Microchip Library Import
By: iain haywood on Thu, 11 June 2015
1 1688 Thu, 11 June 2015 21:40
By: iain haywood
  Width wires autorouter
By: Par Free on Thu, 11 June 2015
0 2673 Thu, 11 June 2015 09:47
By: Par Free
  New Wires unrouted (swith to board)
By: Par Free on Wed, 10 June 2015
0 2648 Wed, 10 June 2015 15:57
By: Par Free
  Force autorouter to skip certain nets
By: jarlgjessing on Wed, 10 June 2015
1 1725 Wed, 10 June 2015 15:05
By: A. Zaffran
  How to Generate BOM in Schematics in Eagle 5.8?
By: Gary Poon on Wed, 10 June 2015
1 1818 Wed, 10 June 2015 07:45
By: Rob Pearce
  Hdmi to usb 2/3
By: John Stefanidis on Fri, 05 June 2015
17 6099 Wed, 10 June 2015 07:13
By: Morten Leikvoll
  Eagle Library and ULP Compatibility Questions
By: Gary Poon on Wed, 10 June 2015
0 2512 Wed, 10 June 2015 02:14
By: Gary Poon
  Raspberry PI or other small computer as a telephone answering machine with caller id check
By: Louis LaBrunda on Tue, 09 June 2015
2 1657 Tue, 09 June 2015 19:43
By: element14jamie
  How does one place a label above a wire and not exactly on it ?
By: Jacques Casier on Thu, 14 May 2015
6 3092 Tue, 09 June 2015 08:54
By: Jacques Casier
  Problems with "DIODES INC CAD Library for Cadsoft EAGLE Software" in Eagle 5.11.0
By: Domingo Pedraza on Mon, 08 June 2015
1 1714 Mon, 08 June 2015 14:57
By: A. Zaffran
Goto Forum:
  
Legend New Messages New Messages   No New messages No New messages   Locked (w/ unread messages) Locked (w/ unread messages)   Locked Locked   Moved to another forum Moved to another forum

Current Time: Fri Jul 28 16:48:13 GMT 2017