EAGLE Central Forums
Where the EAGLE community meets. Sponsored by Stratford Digital.

Home » CadSoft Support Forums » eagle.userchat.eng
All accounts are READ-ONLY by default In order to post, first register and then email your user ID to perms@eaglecentral.ca.

    Replies Views Last message
  Saving Partially Routed Board
By: Amer Abufadel on Tue, 30 June 2009
2 3068 Fri, 10 July 2009 14:28
By: reece
  EAGLE Training :: Any Interest in Ottawa, Ontario Area?
By: James Morrison on Thu, 09 July 2009
0 48618 Thu, 09 July 2009 19:54
By: James Morrison
  Silkscreen covered by board traces when printed.
By: Ed Hillery on Wed, 08 July 2009
1 3310 Thu, 09 July 2009 13:34
By: Oppie[2]
  v5 Follow-me Router
By: RJH on Fri, 06 March 2009
6 5257 Wed, 08 July 2009 06:27
By: peter
  Tutorials
By: Don Soucy on Sat, 27 June 2009
4 4022 Tue, 07 July 2009 12:59
By: Oppie[2]
  Have choice of 16 layers on 2-layer board
By: Alan Stummer on Wed, 24 June 2009
4 4121 Tue, 07 July 2009 12:47
By: Oppie[2]
  HP Plotter print process
By: Thom on Sun, 25 November 2007
2 5002 Sun, 05 July 2009 15:24
By: Don Soucy
  output to HP 7475A plotter
By: Don Soucy on Wed, 01 July 2009
2 5305 Fri, 03 July 2009 06:26
By: Don Soucy
  Help on Eagle3D
By: info[8] on Tue, 30 June 2009
3 3450 Thu, 02 July 2009 05:44
By: cadsoft[2]
  Importing Orcad Capture schematics
By: news.cadsoft on Tue, 30 June 2009
2 8706 Wed, 01 July 2009 20:44
By: James Morrison
  XY PLOTTER
By: Mike Norman on Tue, 04 October 2005
7 7000 Wed, 01 July 2009 17:28
By: info[8]
  Part on board does not match library
By: Alan Stummer on Tue, 30 June 2009
2 3322 Wed, 01 July 2009 07:46
By: Richard Hammerl
  symbolic library for education, with no real parts?
By: Eur van Andel on Tue, 30 June 2009
0 48699 Tue, 30 June 2009 07:48
By: Eur van Andel
  Any reason to upgrade 5.4 to 5.6 ?
By: fake-email on Mon, 29 June 2009
1 3286 Tue, 30 June 2009 06:16
By: user
  Stop mask DRC error
By: Amer Abufadel on Mon, 29 June 2009
1 6177 Mon, 29 June 2009 10:49
By: Amer Abufadel
  Power pins not shown
By: Don Soucy on Fri, 26 June 2009
3 7284 Sat, 27 June 2009 16:19
By: Don Soucy
  Spreading a schematic over several sheets on Lite version
By: richard.bown on Thu, 25 June 2009
0 48832 Thu, 25 June 2009 12:20
By: richard.bown
  GROUP ROTATE
By: richard.bown on Thu, 25 June 2009
1 4936 Thu, 25 June 2009 11:37
By: richard.bown
  3D-POVRay with Eagle 5.x
By: Ross McKenzie on Sun, 21 June 2009
8 5395 Tue, 23 June 2009 09:45
By: Joern Paschedag
  Which library for barrier terminal strips
By: Ross McKenzie on Fri, 19 June 2009
2 3996 Sat, 20 June 2009 06:14
By: Ross McKenzie
  smd-ipc Library
By: MW on Thu, 18 June 2009
0 49800 Thu, 18 June 2009 23:41
By: MW
  Eagle License
By: Chetan Bhargava on Fri, 12 June 2009
5 4183 Wed, 17 June 2009 14:41
By: Edwin Robledo
  Is it possible to modify net aspect ?
By: schneider on Sun, 07 June 2009
2 3424 Mon, 15 June 2009 20:40
By: schneider
  Library Editor signals
By: Etharooni on Sun, 14 June 2009
2 3552 Mon, 15 June 2009 20:01
By: Etharooni
  Copyright symbol
By: Todd Perrodin on Sat, 13 June 2009
3 3760 Mon, 15 June 2009 13:31
By: Morosh
  two layers
By: Saul Rodriguez on Thu, 11 June 2009
2 3482 Thu, 11 June 2009 22:50
By: mailsoc
  Draw Poly on other origin not having same result
By: info[8] on Sat, 06 June 2009
1 3209 Tue, 09 June 2009 09:14
By: Richard Hammerl
  Including one design in a other
By: info[8] on Thu, 04 June 2009
1 3296 Thu, 04 June 2009 13:59
By: Morosh
  Panelizing
By: DR on Wed, 27 May 2009
1 3272 Thu, 04 June 2009 07:50
By: Robert Johnson
  ground pour
By: DR on Wed, 03 June 2009
4 4476 Thu, 04 June 2009 05:53
By: Firat Kocak
  Editing a Schematic Symbol
By: Tom Lukers on Tue, 02 June 2009
2 4158 Wed, 03 June 2009 14:45
By: DR
  TEST
By: Tom Lukers on Tue, 02 June 2009
0 49121 Tue, 02 June 2009 20:22
By: Tom Lukers
  Updating part in a library no longer present
By: Doug on Mon, 01 June 2009
2 3441 Mon, 01 June 2009 22:40
By: Doug
  Old files gone....?
By: billsand on Mon, 18 May 2009
2 3551 Fri, 29 May 2009 15:22
By: Baron
  Pad Dilema
By: Biff on Mon, 25 May 2009
7 4575 Fri, 29 May 2009 00:42
By: Biff
  Update board after library update
By: Biff on Fri, 29 May 2009
1 6322 Fri, 29 May 2009 00:40
By: Biff
  Long Bus Labels
By: Chuck Huber on Tue, 26 May 2009
1 3954 Wed, 27 May 2009 12:37
By: James Morrison
  Eurocircuits
By: info[8] on Tue, 26 May 2009
0 49012 Tue, 26 May 2009 14:55
By: info[8]
  How to make a hatched polygon
By: info[8] on Mon, 25 May 2009
5 5383 Tue, 26 May 2009 12:09
By: user
  Posible loops in a script on placing via's
By: info[8] on Mon, 25 May 2009
0 48171 Mon, 25 May 2009 17:52
By: info[8]
  No solder stop or printing on traces
By: info[8] on Mon, 25 May 2009
1 3302 Mon, 25 May 2009 15:40
By: Christian Bohrer
  Text not pointing correct
By: info[8] on Sat, 23 May 2009
2 3573 Mon, 25 May 2009 13:51
By: info[8]
  Rotating tekst
By: info[8] on Fri, 22 May 2009
3 4218 Mon, 25 May 2009 05:45
By: Lorenz
  WTD: Library
By: radioham59 on Sat, 23 May 2009
0 48684 Sat, 23 May 2009 14:02
By: radioham59
  WTD:
By: radioham59 on Sat, 23 May 2009
0 47246 Sat, 23 May 2009 13:50
By: radioham59
  Tubes.lbr
By: Saul Rodriguez on Thu, 21 May 2009
2 4843 Fri, 22 May 2009 19:56
By: Saul Rodriguez
  Script Language
By: info[8] on Fri, 22 May 2009
3 4407 Fri, 22 May 2009 19:13
By: info[8]
  someone can help me with re-design Eagle PCB ?
By: Johan Peeters on Tue, 19 May 2009
3 3111 Fri, 22 May 2009 17:49
By: Dave P
  How to do this
By: Info on Fri, 13 March 2009
8 4288 Thu, 21 May 2009 14:35
By: Robert Pearce
  Pad hole size, please clarify
By: Amer Abufadel on Wed, 20 May 2009
2 3566 Wed, 20 May 2009 06:25
By: user
  Lost early version files?
By: billsand on Mon, 18 May 2009
2 3069 Tue, 19 May 2009 09:20
By: billsand
  What happened to my old projects?
By: billsand on Mon, 18 May 2009
0 46995 Mon, 18 May 2009 20:34
By: billsand
  Mirror - Layout of PCB
By: suds on Sat, 16 May 2009
2 6771 Mon, 18 May 2009 17:45
By: Morosh
  Web Forum Access to CadSoft News Server
By: James Morrison on Wed, 13 May 2009
0 47007 Wed, 13 May 2009 13:42
By: James Morrison
  Is is possible to do a 16 position BGA on 4 layer board?
By: blewis999 on Tue, 12 May 2009
3 3293 Tue, 12 May 2009 16:08
By: user
  Create a Through-Hole Pad
By: Biff on Mon, 11 May 2009
1 2919 Tue, 12 May 2009 06:46
By: Richard Hammerl
  upgrade from 4.x
By: Bill Norman on Tue, 12 May 2009
1 3092 Tue, 12 May 2009 06:04
By: user
  Wish List for New Features
By: James Morrison on Thu, 05 February 2009
14 6380 Mon, 11 May 2009 21:02
By: sadavis
  Offset in CAM Output
By: Glenn Peterson on Sat, 09 May 2009
1 2982 Mon, 11 May 2009 08:53
By: Richard Hammerl
  Devices with several gates using Invoke.
By: George Blat on Tue, 05 May 2009
1 3074 Tue, 05 May 2009 04:31
By: George Blat
  How to copy Symbol to new one...?
By: Erkki Latomaa on Thu, 30 April 2009
6 5955 Fri, 01 May 2009 23:44
By: Paul Romanyszyn
  signal flow between schematic pages ???
By: sadavis on Fri, 01 May 2009
1 4896 Fri, 01 May 2009 07:27
By: user
  Polygon in Polygon
By: Doug on Thu, 30 April 2009
1 3135 Thu, 30 April 2009 21:22
By: Paul Romanyszyn
  TEST
By: Vince on Wed, 22 April 2009
2 2898 Thu, 30 April 2009 14:12
By: pch
  Importing Attributes
By: Charles Deling on Tue, 28 April 2009
0 46343 Tue, 28 April 2009 19:40
By: Charles Deling
  BOM
By: Amer Abufadel on Wed, 25 March 2009
2 2970 Tue, 28 April 2009 16:42
By: Greg Greenwood
  How to find library
By: Wilson on Mon, 27 April 2009
3 4816 Tue, 28 April 2009 08:06
By: Joern Paschedag
  Need Eagle PCB layout designer
By: Mark Potts on Sun, 05 April 2009
1 3739 Mon, 27 April 2009 21:51
By: Dave P
  How do you know the number of layers needed?
By: Amer Abufadel on Tue, 14 April 2009
1 2663 Mon, 27 April 2009 15:12
By: Greg Greenwood
  Restrict on multiple layers
By: Amer Abufadel on Sat, 25 April 2009
0 46030 Sat, 25 April 2009 17:00
By: Amer Abufadel
  Tented Vias
By: Amer Abufadel on Wed, 22 April 2009
1 4727 Wed, 22 April 2009 09:57
By: Richard Hammerl
  M25P32
By: LE BELLER on Wed, 22 April 2009
0 46099 Wed, 22 April 2009 08:54
By: LE BELLER
  Eagle Layout Services
By: Nathan on Tue, 21 April 2009
0 45871 Tue, 21 April 2009 01:32
By: Nathan
  Renaming parts with U$ designator
By: Rod Martinez on Thu, 16 April 2009
1 3086 Sat, 18 April 2009 01:47
By: Joerg
  Plated holes vs Non plated holes
By: Mansoor on Mon, 30 March 2009
1 4834 Fri, 17 April 2009 19:53
By: Dave P
  Edit custon library part embeded in schematic from other user
By: John K on Fri, 17 April 2009
1 3095 Fri, 17 April 2009 12:40
By: Joern Paschedag
  How to create a chiseled pad?
By: Amer Abufadel on Fri, 17 April 2009
0 46173 Fri, 17 April 2009 00:05
By: Amer Abufadel
  About changing drillsize and not changing the lib
By: Peter Andersen on Thu, 09 April 2009
4 3456 Tue, 14 April 2009 20:05
By: Peter Andersen
  Copying symbols
By: Richard Hince on Thu, 09 April 2009
4 4604 Sat, 11 April 2009 11:29
By: Joern Paschedag
  2 symbol pins sharing the same pad
By: Amer Abufadel on Fri, 10 April 2009
1 3522 Sat, 11 April 2009 01:27
By: James Morrison
  Microchip PIC16f887 part?
By: Ignacio Zozaya on Mon, 16 March 2009
3 10515 Mon, 06 April 2009 15:47
By: mailsoc
  EAGLE Training Course Offered: May 29, Toronto, Canada
By: James Morrison on Sun, 05 April 2009
0 46287 Sun, 05 April 2009 05:12
By: James Morrison
  Phantom Devices
By: user on Thu, 02 April 2009
4 3561 Fri, 03 April 2009 23:02
By: user
  want to make cable and harness drawings
By: oppie on Mon, 30 March 2009
4 4181 Fri, 03 April 2009 12:58
By: oppie
  Library question (ver 4.60 required to load)
By: Prime on Wed, 25 March 2009
4 6170 Thu, 26 March 2009 09:45
By: Joern Paschedag
  Upside down text
By: Prime on Tue, 24 March 2009
3 6620 Wed, 25 March 2009 16:09
By: Christian Bohrer
  HDMI connector
By: Stefan on Wed, 25 March 2009
0 48695 Wed, 25 March 2009 10:53
By: Stefan
  Suggestions for Text Editor for Professional Use
By: James Morrison on Fri, 20 March 2009
5 4573 Tue, 24 March 2009 08:09
By: Oliver Betz
  Editing a Group
By: Boris Ostrovskiy on Mon, 23 March 2009
0 45345 Mon, 23 March 2009 13:02
By: Boris Ostrovskiy
  ERC and Power/Ground
By: tomdean on Mon, 23 March 2009
0 44591 Mon, 23 March 2009 04:33
By: tomdean
  Gerber Generation
By: Bill Bohan on Mon, 23 March 2009
0 43279 Mon, 23 March 2009 01:38
By: Bill Bohan
  Model for LM2941CT
By: simonet-removethis-.b on Mon, 23 March 2009
0 43321 Mon, 23 March 2009 00:04
By: simonet-removethis-.b
  vias in pads?
By: Steve Schupbach on Sun, 22 March 2009
1 3231 Sun, 22 March 2009 08:27
By: guenther.dietrich
  vacuum tube socket base ?
By: Glen Higgs on Tue, 03 February 2009
7 14236 Sat, 21 March 2009 21:17
By: Glen Higgs
  SMD - Solder Mask - Cream Stencil
By: Amer Abufadel on Sat, 21 March 2009
1 5255 Sat, 21 March 2009 13:20
By: Wouter Mense
  Overlapping solder masks
By: Amer Abufadel on Sat, 21 March 2009
1 3438 Sat, 21 March 2009 13:08
By: Wouter Mense
  SMD-elements recognition on photo of printed circuit board
By: Pavel on Fri, 20 March 2009
0 42347 Fri, 20 March 2009 12:15
By: Pavel
  SMD-elements recognition on photo of printed circuit board
By: Pavel on Fri, 20 March 2009
0 42699 Fri, 20 March 2009 12:15
By: Pavel
  SMD-elements recognition on photo of printed circuit board
By: Pavel on Fri, 20 March 2009
0 43127 Fri, 20 March 2009 12:15
By: Pavel
  SMD-elements recognition on photo of printed circuit board
By: Pavel on Fri, 20 March 2009
0 42394 Fri, 20 March 2009 12:14
By: Pavel
Goto Forum:
  
Legend New Messages New Messages   No New messages No New messages   Locked (w/ unread messages) Locked (w/ unread messages)   Locked Locked   Moved to another forum Moved to another forum

Current Time: Fri Apr 28 16:06:04 GMT 2017